EUVIMEDEUVIMED entdecken
Crossref

Design and Fabrication of Cost-Effective Low-Speed Subsonic Open Type Wind Tunnel

Abdul Basit, Sufyan Ahmed, Muhammad Hamza, Sarmad Ali Shah, Samar Iqbal, Muhammad Hassan Razzaq, Sheharyar Malik

Pakistan Journal of Engineering and Technology · 2020

DOI: 10.51846/vol3iss2pp137-142 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pakistan Journal of Engineering and Technology, 2020. Verfasst von Abdul Basit und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the design and manufacturing of open circuit low-speed wind tunnel. The design of the contraction cone, test section and diffuser are finalized by the numerical analysis performed on ANSYS CFD software. A unique insight into the design of the contraction cone is presented. A fifth-order polynomial is used to model the contraction cone in PRO-E software. It allowed designing the test section with minimum turbulence and flow serration and a flow velocity profile of 20 m/s. The cross-sectional area of the test section and diffuser are selected after analytical calculations. The diffuser is designed as such to avoid pressure loss by incorporation changes in the rectangular cross-section. The initial study performed on the design helped us to select the fan with suitable power. Moreover, the intake of the contraction cone is equipped with the honeycomb structure of facilitating the laminar flow into the contraction cone. Following on to the initial numerical analysis, the fabrication of the wind tunnel is performed. Besides, a separate lift/drag measuring force system is also prepared; the intuitive design is cost-effective as well as accurate. The placement of anemometer helped us to directly measure the test section velocity, which is found to be 17 m/s.

Zitieren

APA

Basit, A., Ahmed, S., Hamza, M., Shah, S. A., Iqbal, S., Razzaq, M. H., & Malik, S. (2020). Design and Fabrication of Cost-Effective Low-Speed Subsonic Open Type Wind Tunnel. Pakistan Journal of Engineering and Technology. https://doi.org/10.51846/vol3iss2pp137-142

Vancouver

Basit A, Ahmed S, Hamza M, Shah SA, Iqbal S, Razzaq MH, et al. Design and Fabrication of Cost-Effective Low-Speed Subsonic Open Type Wind Tunnel. Pakistan Journal of Engineering and Technology. 2020. doi:10.51846/vol3iss2pp137-142

BibTeX
@article{Basit2020,
  author = {Basit, Abdul and Ahmed, Sufyan and Hamza, Muhammad and Shah, Sarmad Ali and Iqbal, Samar and Razzaq, Muhammad Hassan and Malik, Sheharyar},
  title = {Design and Fabrication of Cost-Effective Low-Speed Subsonic Open Type Wind Tunnel},
  journal = {Pakistan Journal of Engineering and Technology},
  year = {2020},
  doi = {10.51846/vol3iss2pp137-142}
}
Kostenlos starten →