Compact Open-Loop Subsonic Wind Tunnel: Design, Fabrication, and Preliminary Performance Assessment of a Compact Open-Loop Subsonic Wind Tunnel
Semesta Teknika · 29.12.2025 · 28 (2) · 156-170
DOI: 10.18196/st.v28i2.30282 ↗Kurz gefasst
Fachartikel in der Zeitschrift Semesta Teknika, online erschienen am 29.12.2025. Verfasst von Thoharudin Thoharudin und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study presents the design, fabrication, and preliminary performance assessment of a compact open-loop subsonic wind tunnel intended for teaching and small-scale aerodynamic experiments. The wind tunnel has an overall length of approximately 3 m and features a 250 mm × 250 mm closed test section. The design incorporates an 8:1 contraction ratio, a settling chamber equipped with a hexagonal honeycomb flow straightener, and a diffuser with a 3.5° expansion angle. Two 750 W blowers arranged in series were used to provide airflow within the system. Experimental evaluation was conducted using a 50 mm cube as a bluff-body test specimen at freestream velocities ranging from 5.5 to 13.25 m/s. Drag force measurements showed an increasing trend with velocity, consistent with aerodynamic theory. The results were further analyzed using coefficient of drag (CD) and Reynolds number (Re). The experimental Reynolds number ranged from 1.77×104 to 4.28×104, while Cd remained relatively stable between 1.01 and 1.07, indicating bluff-body flow dominated by separation and wake formation. Computational Fluid Dynamics simulations using a steady two-dimensional standard k–ε model produced higher drag force and Cd values (approximately 1.10–1.15) than the experiments, mainly due to limitations in capturing three-dimensional flow structures. Comparison with Rahmanto et al. (2008) shows reasonable agreement in the Cd–Re trend. The wind tunnel is therefore suitable for basic aerodynamic experiments, although full validation requires future measurements of velocity uniformity and turbulence intensity.
Zitieren
APA
Thoharudin, T., Yudha, F. A. K., Alaa'uddin, A. M., & Sinaga, A. M. A. (2025). Compact Open-Loop Subsonic Wind Tunnel: Design, Fabrication, and Preliminary Performance Assessment of a Compact Open-Loop Subsonic Wind Tunnel. Semesta Teknika, 28(2), 156-170. https://doi.org/10.18196/st.v28i2.30282
Vancouver
Thoharudin T, Yudha FAK, Alaa'uddin AM, Sinaga AMA. Compact Open-Loop Subsonic Wind Tunnel: Design, Fabrication, and Preliminary Performance Assessment of a Compact Open-Loop Subsonic Wind Tunnel. Semesta Teknika. 2025;28(2):156-170. doi:10.18196/st.v28i2.30282
BibTeX
@article{Thoharudin2025,
author = {Thoharudin, Thoharudin and Yudha, Fitroh Anugrah Kusuma and Alaa'uddin, Azizan Mas'ud and Sinaga, Akbar Malik Abdurrahman},
title = {Compact Open-Loop Subsonic Wind Tunnel: Design, Fabrication, and Preliminary Performance Assessment of a Compact Open-Loop Subsonic Wind Tunnel},
journal = {Semesta Teknika},
year = {2025},
volume = {28},
number = {2},
pages = {156--170},
doi = {10.18196/st.v28i2.30282}
}
EUVIMED