Design-Stage Assessment of the IE3 Efficiency Margin of a 3 kW Induction Motor for Pump Applications Using Analytical, Finite Element and Equivalent-Circuit Models
Sürdürülebilir Mühendislik Uygulamaları ve Teknolojik Gelişmeler Dergisi · 15.11.2026 · 9 (1)
DOI: 10.51764/smutgd.2065130 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sürdürülebilir Mühendislik Uygulamaları ve Teknolojik Gelişmeler Dergisi, online erschienen am 15.11.2026. Verfasst von Berk Demirsoy und 1 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben.
Abstract (Originalsprache)
Minimum energy performance standards increasingly require line-operated induction motors to reach the IE3 efficiency class, and small four-pole motors in centrifugal pump drives are among the machines most affected. For such motors, the margin between the predicted efficiency and the IE3 limit can be only a few tenths of a percentage point, so its design-stage assessment is sensitive to the modelling tool and to the loss assumptions. This study evaluates the IE3 compliance of a 3 kW, 400 V, 50 Hz, four-pole, 36/28-slot squirrel-cage induction motor with a two-slot short-pitched winding. The motor was designed analytically and analysed with the Ansys RMxprt analytical solver and Maxwell 2D transient finite element analysis (FEA). An equivalent circuit identified from the RMxprt losses, a dynamic dq model and a winding-function model were used to interpret the FEA results, and the efficiency was evaluated for different stray-load-loss bases, lamination grades and supply voltages. RMxprt predicts an efficiency of 87.93%, 0.23 percentage points above the IE3 limit of 87.7%; this margin corresponds to only 8.8 W of additional loss. The uncorrected FEA power balance yields 90.3%; when the core and stray-load losses are included and the result is referred to the rated output of 3.00 kW, the FEA efficiency is 87.9–88.2% for two bookkeeping scenarios of a 12.7 W residual loss, in agreement with RMxprt. The IE3 margin is lost when the stray-load loss is taken from the IEC 60034-2-1 assigned allowance (86.74%), when M400-50A lamination is used (87.64%), or when a friction and windage loss of more than about 7 W is included. Short pitching reduces the fifth MMF harmonic from 4.5% to 0.8%, whereas its estimated effect on the efficiency is only about 0.1 percentage points. The FEA-based locked-rotor current is 6.8 times the rated current. These results are design-stage predictions; they show that IE3 assessments of small motors should be based on an explicit loss budget and confirmed by standardised testing.
Zitieren
APA
Demirsoy, B., & Soyaslan, M. (2026). Design-Stage Assessment of the IE3 Efficiency Margin of a 3 kW Induction Motor for Pump Applications Using Analytical, Finite Element and Equivalent-Circuit Models. Sürdürülebilir Mühendislik Uygulamaları ve Teknolojik Gelişmeler Dergisi, 9(1). https://doi.org/10.51764/smutgd.2065130
Vancouver
Demirsoy B, Soyaslan M. Design-Stage Assessment of the IE3 Efficiency Margin of a 3 kW Induction Motor for Pump Applications Using Analytical, Finite Element and Equivalent-Circuit Models. Sürdürülebilir Mühendislik Uygulamaları ve Teknolojik Gelişmeler Dergisi. 2026;9(1). doi:10.51764/smutgd.2065130
BibTeX
@article{Demirsoy2026,
author = {Demirsoy, Berk and Soyaslan, Mücahit},
title = {Design-Stage Assessment of the IE3 Efficiency Margin of a 3 kW Induction Motor for Pump Applications Using Analytical, Finite Element and Equivalent-Circuit Models},
journal = {Sürdürülebilir Mühendislik Uygulamaları ve Teknolojik Gelişmeler Dergisi},
year = {2026},
volume = {9},
number = {1},
doi = {10.51764/smutgd.2065130}
}
EUVIMED