EUVIMEDObjevte EUVIMED
Crossref

Evaluating the Use of Phosphate to Mitigate Caustic-PbSCC of Alloy 690TT

Giulia B. Mazzei, Jonathan Duff, D. Anthony Horner, M. Grace Burke, Fabio Scenini

Corrosion · 2026-05-01 · 82 (5) · 443-455

DOI: 10.5006/4887 ↗

At a glance

Journal article in Corrosion, published online on 2026-03-31. Written by Giulia B. Mazzei and 4 co-authors. 66 references.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Phosphate additions to Pb-caustic water chemistry were investigated as a potential mitigation strategy for lead-assisted stress corrosion cracking (PbSCC) of Alloy 690TT at approximately 310°C. Autoclave tests were performed for 500 h using C-ring specimens strained in the plastic regime and exposed to four caustic environments (pH_high-T ∼10) containing different PbO and phosphate concentrations. Two surface conditions were examined: as-received and OPS-polished. Results showed that 1,700 ppm phosphate provided only a minor benefit in reducing PbSCC severity, while 3,000 ppm phosphate mitigated cracking for as-received surfaces but promoted localized attack on polished surfaces. Advanced microstructural characterization (scanning electron microscope, focused ion beam-transmission electron microscopy, and scanning transmission electron microscopy with energy-dispersive x-ray) revealed similar crack-tip oxide compositions across all environments, with Pb incorporated in a (Cr,Fe)_3O_4 spinel phase at approximately 1 wt% to 3 wt%. These findings show that phosphate reduces PbSCC kinetics by partially sequestering Pb from solution rather than altering crack-tip chemistry. Although mitigation was incomplete, the results provide insight into inhibitor performance under concentrated crevice-like conditions and highlight the complexity of controlling PbSCC. These findings inform inhibitor selection and water chemistry strategies aimed at improving long-term PWR steam generator integrity.

Cite

APA

Mazzei, G. B., Duff, J., Horner, D. A., Burke, M. G., & Scenini, F. (2026). Evaluating the Use of Phosphate to Mitigate Caustic-PbSCC of Alloy 690TT. Corrosion, 82(5), 443-455. https://doi.org/10.5006/4887

Vancouver

Mazzei GB, Duff J, Horner DA, Burke MG, Scenini F. Evaluating the Use of Phosphate to Mitigate Caustic-PbSCC of Alloy 690TT. Corrosion. 2026;82(5):443-455. doi:10.5006/4887

BibTeX
@article{Mazzei2026,
  author = {Mazzei, Giulia B. and Duff, Jonathan and Horner, D. Anthony and Burke, M. Grace and Scenini, Fabio},
  title = {Evaluating the Use of Phosphate to Mitigate Caustic-PbSCC of Alloy 690TT},
  journal = {Corrosion},
  year = {2026},
  volume = {82},
  number = {5},
  pages = {443--455},
  doi = {10.5006/4887}
}
Start for free →