From Initiation to Propagation: A Data-Driven, Multiscale Modeling of Pitting Corrosion in W18Cr4V High-Speed Steel Under Acetic Acid Environment
Corrosion · 2026-07-01 · 82 (7) · 650-668
DOI: 10.5006/4874 ↗At a glance
Journal article in Corrosion, published online on 2026-05-06. Written by Na Jia and 4 co-authors. 41 references.
Abstract (original language)
W18Cr4V high-speed steel is the core material for woodworking cutting tools, and its corrosion-induced failure in acidic wood media is the primary cause of shortened tool service life. Existing studies have mostly focused on macroscopic corrosion behavior characterization, while quantitative elucidation of microscale corrosion initiation mechanisms and dynamic pit propagation processes remains insufficient. This study systematically clarifies the entire corrosion failure process of W18Cr4V steel in acetic acid media by combining electrochemical experiments and multiphysics numerical simulations. First, potentiodynamic polarization tests and static immersion experiments were conducted to determine the corrosion kinetic parameters of W18Cr4V steel in acetic acid solutions with concentrations ranging from 1% to 20%. The results show that the material exhibits typical active corrosion characteristics, and the corrosion rate shows a significant nonmonotonic dependence on acetic acid concentration: it increases first and then decreases with increasing concentration, reaching a peak at 15% concentration. On this basis, a two-dimensional microgalvanic corrosion model containing the Fe matrix and WC carbide phases was constructed. In the model, the Fe-Cr-V-W multicomponent substitutional solid solution matrix was simplified as a pure iron phase, based on the fact that Fe accounts for over 70 wt% and its oxidation reaction dominates the dissolution behavior. The simulation results quantitatively reveal the microgalvanic effect during the corrosion initiation stage, showing that corrosion preferentially nucleates at the interphase boundaries between WC carbides and the matrix due to electrochemical activity differences, with the local current density at the boundaries reaching 3–5 times the average current density of the matrix. Furthermore, an axisymmetric pit propagation model based on the level set method was established to reveal the evolution law of the occluded microenvironment inside pits. It is found that, contrary to the common perception of self-acidification inside pits in traditional strong acid systems, the consumption rate of H+ by the cathodic hydrogen evolution reaction is much higher than the production rate of H+ by Fe2+ hydrolysis in this acetic acid system, leading to local alkalization inside the pits. Meanwhile, the increase in local conductivity caused by ion enrichment forms an autocatalytic positive feedback loop, driving the rapid deep propagation of pits. Finally, the reliability of the simulation model was verified from three dimensions: macroscopic trend, microscopic morphology, and chemical composition through surface topography and component analysis of static immersion experiments. The “initiation-propagation” progressive corrosion model established in this study can provide a theoretical basis for corrosion life prediction and protective design of woodworking cutting tools.
Cite
APA
Jia, N., Yang, H., Shen, C., Zhang, C., & Liu, J. (2026). From Initiation to Propagation: A Data-Driven, Multiscale Modeling of Pitting Corrosion in W18Cr4V High-Speed Steel Under Acetic Acid Environment. Corrosion, 82(7), 650-668. https://doi.org/10.5006/4874
Vancouver
Jia N, Yang H, Shen C, Zhang C, Liu J. From Initiation to Propagation: A Data-Driven, Multiscale Modeling of Pitting Corrosion in W18Cr4V High-Speed Steel Under Acetic Acid Environment. Corrosion. 2026;82(7):650-668. doi:10.5006/4874
BibTeX
@article{Jia2026,
author = {Jia, Na and Yang, Haoran and Shen, Chenguang and Zhang, Chunpu and Liu, Jiuqing},
title = {From Initiation to Propagation: A Data-Driven, Multiscale Modeling of Pitting Corrosion in W18Cr4V High-Speed Steel Under Acetic Acid Environment},
journal = {Corrosion},
year = {2026},
volume = {82},
number = {7},
pages = {650--668},
doi = {10.5006/4874}
}
EUVIMED