EUVIMEDSkopri EUVIMED
Crossref

High-Temperature Corrosion Behavior of an Fe-Ni-Cr-Mo Alloy Modified by Al Additions in Oxidizing Chlorine-Containing Atmosphere

Yaxiao Guan, Zhiliang Lan, Longfa Jiang, Junhuai Xiang, Lingyun Bai, Botao Xiao

Corrosion · 2026-06-01 · 82 (6) · 586-595

DOI: 10.5006/4869 ↗

At a glance

Journal article in Corrosion, published online on 2026-03-31. Written by Yaxiao Guan and 5 co-authors. 71 references.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

The influence of aluminum (Al) addition content on the high-temperature chlorine corrosion behavior of Fe-Ni-Cr-Mo alloy (254SMo) alloy modified by Al additions was investigated in a simulated waste incinerator environment containing N2-2.6 vol%, CO2-1.3 vol%, and O2-2,700 vppm HCl at 700°C. The results demonstrate that as the Al content increases, the microstructure transforms from a single-phase austenite to an intermetallic compound phase structure comprising (Fe,Ni) and FeAlCr, accompanied by grain refinement. The corrosion kinetics curves of 254SMo alloys with 0 at%, 5 at%, 10 at%, and 15 at% Al addition after 80 h of corrosion all follow the parabolic law. The 254SMo:5Al alloy exhibited the highest corrosion weight gain of 1.3280 mg/cm2, while the 254SMo:15Al alloy showed the lowest weight gain of 0.1116 mg/cm2. The chlorine corrosion product layer exhibits a tri-layer structure of “FexOy/Cr2O3/Al2O3”, where the density of the inner Al2O3 layer increases with higher Al content, effectively inhibiting the chlorine cycle during the “active oxidation” process. The 254SMo:5Al alloy demonstrated poor corrosion resistance due to the discontinuous Al2O3 layer, leading to localized oxide formation. In contrast, the 254SMo:15Al alloy forms a continuous Cr2O3/Al2O3 composite oxide layer, significantly enhancing the inhibition efficiency against Cl− diffusion and achieving optimal high-temperature chlorine corrosion resistance.

Cite

APA

Guan, Y., Lan, Z., Jiang, L., Xiang, J., Bai, L., & Xiao, B. (2026). High-Temperature Corrosion Behavior of an Fe-Ni-Cr-Mo Alloy Modified by Al Additions in Oxidizing Chlorine-Containing Atmosphere. Corrosion, 82(6), 586-595. https://doi.org/10.5006/4869

Vancouver

Guan Y, Lan Z, Jiang L, Xiang J, Bai L, Xiao B. High-Temperature Corrosion Behavior of an Fe-Ni-Cr-Mo Alloy Modified by Al Additions in Oxidizing Chlorine-Containing Atmosphere. Corrosion. 2026;82(6):586-595. doi:10.5006/4869

BibTeX
@article{Guan2026,
  author = {Guan, Yaxiao and Lan, Zhiliang and Jiang, Longfa and Xiang, Junhuai and Bai, Lingyun and Xiao, Botao},
  title = {High-Temperature Corrosion Behavior of an Fe-Ni-Cr-Mo Alloy Modified by Al Additions in Oxidizing Chlorine-Containing Atmosphere},
  journal = {Corrosion},
  year = {2026},
  volume = {82},
  number = {6},
  pages = {586--595},
  doi = {10.5006/4869}
}
Start for free →