EUVIMEDOpdag EUVIMED
Crossref

Hot Corrosion Resistance of a NiCrMoAlSi Cladding Layers Under K2SO4-ZnCl2 Molten Salt Film in Air

Hailiang Zhang, Jiangtao Wu

Corrosion · 2026-07-01 · 82 (7) · 613-625

DOI: 10.5006/4846 ↗

At a glance

Journal article in Corrosion, published online on 2026-05-06. Written by Hailiang Zhang and 1 co-authors. 37 references.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This study aims to evaluate the hot corrosion resistance of a novel NiCrMoAlSi cladding layer compared to conventional Inconel 625 under a K2SO4–55 at% ZnCl2 salt film at 650°C and 700°C, elucidating the role of Al and Si in enhancing protective oxide scale formation. Inconel 625 and NiCrMoAlSi cladding layers were prepared via laser cladding and subjected to 100-h hot corrosion tests under a deposited salt film. Mass loss measurements, x-ray diffraction, and scanning electron microscopy-energy dispersive spectorsopy were used to analyze corrosion products, scale morphology, and elemental distribution. The NiCrMoAlSi cladding layer exhibited significantly lower mass loss (2.63 mg/cm2 to 6.43 mg/cm2) than Inconel 625 (27.05 mg/cm2 to 27.52 mg/cm2), due to a dense, multilayered oxide scale enriched with Cr and Al externally and Si internally. In contrast, Inconel 625 formed porous oxides and a Cr/Fe dissolution zone, leading to severe corrosion degradation.

Cite

APA

Zhang, H., & Wu, J. (2026). Hot Corrosion Resistance of a NiCrMoAlSi Cladding Layers Under K2SO4-ZnCl2 Molten Salt Film in Air. Corrosion, 82(7), 613-625. https://doi.org/10.5006/4846

Vancouver

Zhang H, Wu J. Hot Corrosion Resistance of a NiCrMoAlSi Cladding Layers Under K2SO4-ZnCl2 Molten Salt Film in Air. Corrosion. 2026;82(7):613-625. doi:10.5006/4846

BibTeX
@article{Zhang2026,
  author = {Zhang, Hailiang and Wu, Jiangtao},
  title = {Hot Corrosion Resistance of a NiCrMoAlSi Cladding Layers Under K2SO4-ZnCl2 Molten Salt Film in Air},
  journal = {Corrosion},
  year = {2026},
  volume = {82},
  number = {7},
  pages = {613--625},
  doi = {10.5006/4846}
}
Start for free →