EUVIMEDObjevte EUVIMED
Crossref

Transformer Health Monitoring Using IoT Technology

Mr. Shaikh Hamza Altaf, Ms. Shaikh Alsifat MD Yusuf, Ms. Shaikh Sharin Amulal, Mr. Gurav Tukaram Dattatray, Prof. Dr. P. K. Magadum

International Journal of Advanced Research in Science Communication and Technology · 2026-10-29 · 50

DOI: 10.48175/ijarsct-40407 ↗

At a glance

Journal article in International Journal of Advanced Research in Science Communication and Technology, published online on 2026-10-29. Written by Mr. Shaikh Hamza Altaf and 4 co-authors. 6 references.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Power transformers are important parts of electrical power systems. Their reliable operation depends on temperature, loading, insulation and environmental conditions. Manual inspection at intervals may not identify an abnormal condition immediately. This project presents a laboratory-scale Transformer Health Monitoring System using an Arduino Uno, sensors, a character LCD, relay modules and GSM communication. The prototype demonstrates temperature measurement, approximate liquid-level measurement, flood detection, DC load voltage and current measurement, load switching, local alarms and remote alerts. A DS18B20 sensor measures temperature. An HC-SR04 ultrasonic sensor measures distance to the surface of a demonstration liquid, which the Arduino converts to a percentage using configured empty and full distances. An ACS712 sensor measures demonstration-load current, while a voltage-divider circuit measures DC load voltage. The LCD shows operating values and status. In the report design, a temperature reading above 48°C triggers a warning/protection sequence; the lower reset threshold is 47°C. Flood detection also activates an alarm and line-disconnection relay. The SIM800L module is intended to send an SMS and place a call for a high-temperature event. The prototype demonstrates the relationship between sensing, controller logic, protection actions and communication. It is an educational model and must not be treated as certified protection equipment for a real power transformer..

Cite

APA

Altaf, M. S. H., Yusuf, M. S. A. M., Amulal, M. S. S., Dattatray, M. G. T., & Magadum, P. D. P. K. (2026). Transformer Health Monitoring Using IoT Technology. International Journal of Advanced Research in Science Communication and Technology, 50. https://doi.org/10.48175/ijarsct-40407

Vancouver

Altaf MSH, Yusuf MSAM, Amulal MSS, Dattatray MGT, Magadum PDPK. Transformer Health Monitoring Using IoT Technology. International Journal of Advanced Research in Science Communication and Technology. 2026:50. doi:10.48175/ijarsct-40407

BibTeX
@article{Altaf2026,
  author = {Altaf, Mr. Shaikh Hamza and Yusuf, Ms. Shaikh Alsifat MD and Amulal, Ms. Shaikh Sharin and Dattatray, Mr. Gurav Tukaram and Magadum, Prof. Dr. P. K.},
  title = {Transformer Health Monitoring Using IoT Technology},
  journal = {International Journal of Advanced Research in Science Communication and Technology},
  year = {2026},
  pages = {50},
  doi = {10.48175/ijarsct-40407}
}
Start for free →