Dual-Waste Integration of Nickel Slag and Cement-Treated HDPE for Sustainable Masonry Block Production
Engineering, Technology & Applied Science Research · 06.06.2026 · 16 (3) · 36146-36154
DOI: 10.48084/etasr.18650 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 06.06.2026. Verfasst von Ahmad und 2 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Using industrial and domestic waste in construction materials is a sustainable way to develop infrastructure. This study presents a novel dual-waste approach that combines nickel slag as a fine aggregate with cement-treated High-Density Polyethylene (HDPE) at an ultra-low substitution level of 0.2–1%. Unlike conventional polymer-modified systems, this study shows that using a small amount of surface-engineered HDPE can improve mechanical performance under controlled conditions without the detrimental effects of higher polymer dosages. Concrete blocks with a constant water-to-cement (w/c) ratio of 0.52 were produced and cured for 28 days in accordance with the Indonesian National Standard (SNI) requirements. The results show that ultra-low HDPE incorporation leads to a controlled reduction in density (2,543.75–2,211.45 kg/m³) while maintaining structural integrity. Water absorption remained within the limits of SNI 03-0349-1989 (5.24–6.67%), indicating effective porosity control through the surfaces of the cement-treated polymer. Compressive strength increased from 7.12 MPa in the control mixture to 10.04 MPa at 0.8% HDPE, achieving Grade I classification. Strain behavior indicates improved deformability, suggesting a transition toward a more ductile response compared to conventional brittle cementitious systems. This study shows that ultra-low, surface-modified HDPE can achieve comparable or improved performance while minimizing material disruption, proposing a precision-based material design strategy that enhances mechanical properties and promotes sustainable waste usage in masonry block production.
Zitieren
APA
Ahmad, Irmawaty, R., & Parung, H. (2026). Dual-Waste Integration of Nickel Slag and Cement-Treated HDPE for Sustainable Masonry Block Production. Engineering, Technology & Applied Science Research, 16(3), 36146-36154. https://doi.org/10.48084/etasr.18650
Vancouver
Ahmad, Irmawaty R, Parung H. Dual-Waste Integration of Nickel Slag and Cement-Treated HDPE for Sustainable Masonry Block Production. Engineering, Technology & Applied Science Research. 2026;16(3):36146-36154. doi:10.48084/etasr.18650
BibTeX
@article{Ahmad2026,
author = {Ahmad and Irmawaty, Rita and Parung, Herman},
title = {Dual-Waste Integration of Nickel Slag and Cement-Treated HDPE for Sustainable Masonry Block Production},
journal = {Engineering, Technology & Applied Science Research},
year = {2026},
volume = {16},
number = {3},
pages = {36146--36154},
doi = {10.48084/etasr.18650}
}
EUVIMED