EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluating the Integration of Bio-based Waste into Cement Production: A Pathway to Sustainable Building

Anja Terzić, Suzana Filipović, Adriana Peleš Tadić, Jelena Živojinović, Ivana N. Jelić, Nina Obradović, William G. Fahrenholtz

Sustainability · 14.05.2026 · 18 (10) · 4959

DOI: 10.3390/su18104959 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainability, online erschienen am 14.05.2026. Verfasst von Anja Terzić und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation of the Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rapid urbanization has increased the demand for building materials, depleting natural resources used in cement production and prompting the use of alternative and waste materials. This research verifies that eggshell powder waste can fully replace limestone in clinker synthesis. Five clinkers were produced using eggshell powder, aluminum sources (bentonite, zeolite, fly ash, and kaolinitic–illitic clay), Fe-slag, and quartz sand, with mechanical preprocessing (10–30 min) before sintering at 1300 °C. Experimental tests assessed the effects of mix design and mechanical activation on clinkerization, phase formation, temperature, and mechanical properties. XRD, FTIR, and SEM/EDS confirmed consistent phase compositions and primary cement minerals. Aluminum source raw materials contributed significantly to tricalcium aluminate and tetracalcium aluminoferrite formation. Eggshell and fly ash promoted tricalcium silicate and dicalcium silicate synthesis, enhancing cement strength at early and late ages. Longer mechanical pretreatments hindered clinkerization. Eggshell-based cements untreated or pretreated for 10 min are suitable for structural concrete; 20–30 min pretreatment is appropriate for low-demand or non-structural applications. The proposed methodology reduces clinker manufacturing temperature by about 100 °C from the typical range of 1400–1450 °C while maintaining mechanical properties comparable to ordinary Portland cement.

Förderung

  • Ministry of Science, Technological Development and Innovation of the Republic of Serbia

Zitieren

APA

Terzić, A., Filipović, S., Tadić, A. P., Živojinović, J., Jelić, I. N., Obradović, N., & Fahrenholtz, W. G. (2026). Evaluating the Integration of Bio-based Waste into Cement Production: A Pathway to Sustainable Building. Sustainability, 18(10), 4959. https://doi.org/10.3390/su18104959

Vancouver

Terzić A, Filipović S, Tadić AP, Živojinović J, Jelić IN, Obradović N, et al. Evaluating the Integration of Bio-based Waste into Cement Production: A Pathway to Sustainable Building. Sustainability. 2026;18(10):4959. doi:10.3390/su18104959

BibTeX
@article{Terzi2026,
  author = {Terzić, Anja and Filipović, Suzana and Tadić, Adriana Peleš and Živojinović, Jelena and Jelić, Ivana N. and Obradović, Nina and Fahrenholtz, William G.},
  title = {Evaluating the Integration of Bio-based Waste into Cement Production: A Pathway to Sustainable Building},
  journal = {Sustainability},
  year = {2026},
  volume = {18},
  number = {10},
  pages = {4959},
  doi = {10.3390/su18104959}
}
Kostenlos starten →