EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Experimental Study of the Tribological Properties of a Wedge Gate Valve Components with Sv-10Х17Т Welding Wire Surfacing

Zhanara Mussina, Dinara Iskakova, Assylbek Kassenov, Kaіratolla Abishev, Galiya Itybayeva, Aizhan Taskarina, Ansagan Suleimenov, Assylkhan Mazdubay, Sagynysh Nurkimbayev, Davran Radjibaev

Engineering, Technology & Applied Science Research · 08.12.2025 · 15 (6) · 28891-28897

DOI: 10.48084/etasr.13453 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 08.12.2025. Verfasst von Zhanara Mussina und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effect of surfacing with Sv-10Х17Т welding wire on the tribological properties of steel samples. The research is motivated by the need to extend the service life of components operating under frictional loads while reducing the maintenance and repair costs. The focus is on a key element of the pipeline shut-off valves, the wedge of a wedge gate valve, which experiences high contact stresses and severe wear during operation. Laboratory tests were conducted under various friction conditions, involving dry friction, water-based media, and oil-based media. Parameters, such as the coefficient and moment of friction, contact temperature, mass loss, wear depth, surface microhardness (both before and after testing), and surface roughness (Ra), were systematically measured. Experiments with steel samples surfaced using Sv-10Х17Т welding wire were designed to replicate actual valve working conditions. The results showed that Sv-10Х17Т surfacing significantly increased wear resistance, reduced friction, and enhanced surface microhardness, particularly under prolonged dry friction. The microstructural analysis confirmed the formation of a hardened riveted surface layer with deformation strengthening and partial thermal treatment. These findings indicate that Sv-10Х17Т surfacing not only restores, but also improves the performance of the steel components, offering an effective method to extend the operational life. The outcomes of this research have practical value for mechanical engineering, as well as the repair and maintenance of pipeline equipment, turbines, gearboxes, bearings, valves, and other critical components.

Zitieren

APA

Mussina, Z., Iskakova, D., Kassenov, A., Abishev, K., Itybayeva, G., Taskarina, A., Suleimenov, A., Mazdubay, A., Nurkimbayev, S., & Radjibaev, D. (2025). An Experimental Study of the Tribological Properties of a Wedge Gate Valve Components with Sv-10Х17Т Welding Wire Surfacing. Engineering, Technology & Applied Science Research, 15(6), 28891-28897. https://doi.org/10.48084/etasr.13453

Vancouver

Mussina Z, Iskakova D, Kassenov A, Abishev K, Itybayeva G, Taskarina A, et al. An Experimental Study of the Tribological Properties of a Wedge Gate Valve Components with Sv-10Х17Т Welding Wire Surfacing. Engineering, Technology & Applied Science Research. 2025;15(6):28891-28897. doi:10.48084/etasr.13453

BibTeX
@article{Mussina2025,
  author = {Mussina, Zhanara and Iskakova, Dinara and Kassenov, Assylbek and Abishev, Kaіratolla and Itybayeva, Galiya and Taskarina, Aizhan and Suleimenov, Ansagan and Mazdubay, Assylkhan and Nurkimbayev, Sagynysh and Radjibaev, Davran},
  title = {An Experimental Study of the Tribological Properties of a Wedge Gate Valve Components with Sv-10Х17Т Welding Wire Surfacing},
  journal = {Engineering, Technology & Applied Science Research},
  year = {2025},
  volume = {15},
  number = {6},
  pages = {28891--28897},
  doi = {10.48084/etasr.13453}
}
Kostenlos starten →