3D Printing and Performance Characterization of PVDF/PLA/BTO Piezoelectric Intervertebral Fusion Cages
Progress in Chinese Materials Sciences · 2025
DOI: 10.48014/pcms.20250420002 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Chinese Materials Sciences, 2025. Verfasst von Guoqing GAO und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This study aims to investigate the promotive effect of bone healing through electrical stimulation and proposes a novel method of applying the piezoelectric polymer polyvinylidene fluoride (PVDF) in intervertebral fusion devices. Utilizing 3D printing technology, personalized designs are achieved based on patient CT images. To enhance the piezoelectric properties of PVDF, barium titanate (BTO) powder at 3% mass fraction is incorporated, along with 15% polylactic acid (PLA) to improve the thermal expansion performance and flowability. The study found that as the filling rate increased from 40% to 70%, the piezoelectric signal strength decreased, but the compressive strength improved. At a 60% filling rate, the device produced a 397 mV piezoelectric signal under a 100N load and exhibited a compressive strength of 34. 55 MPa. The results indicate that a 60% filling rate is the optimal choice, demonstrating that the optimized intervertebral fusion device possesses excellent piezoelectric and mechanical properties, which provides a new approach for personalized medicine.
Zitieren
APA
GAO, G., ZHANG, H., SANG, L., & DONG, X. (2025). 3D Printing and Performance Characterization of PVDF/PLA/BTO Piezoelectric Intervertebral Fusion Cages. Progress in Chinese Materials Sciences. https://doi.org/10.48014/pcms.20250420002
Vancouver
GAO G, ZHANG H, SANG L, DONG X. 3D Printing and Performance Characterization of PVDF/PLA/BTO Piezoelectric Intervertebral Fusion Cages. Progress in Chinese Materials Sciences. 2025. doi:10.48014/pcms.20250420002
BibTeX
@article{GAO2025,
author = {GAO, Guoqing and ZHANG, Hao and SANG, Lin and DONG, Xufeng},
title = {3D Printing and Performance Characterization of PVDF/PLA/BTO Piezoelectric Intervertebral Fusion Cages},
journal = {Progress in Chinese Materials Sciences},
year = {2025},
doi = {10.48014/pcms.20250420002}
}
EUVIMED