EUVIMEDEUVIMED entdecken
Crossref

Microstructure and Properties of Dual-beam Laser Welded Joints of Medical NiTi Alloy and WE43 Magnesium Alloy

Chunxu ZHANG, Chang XU, Hongyang WANG, Min QI, Xijing ZHUANG, Xufeng DONG

Progress in Chinese Materials Sciences · 2025

DOI: 10.48014/pcms.20250420001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Chinese Materials Sciences, 2025. Verfasst von Chunxu ZHANG und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Current mose interventional stents are made of the same metal material, which makes it difficult to achieve controllable degradation in local areas. Their non degradable anchoring end can easily lead to vascular intimal damage and long-term complications such as distal rupture (dSINE) . This study implemented coaxial dual-beam pulsed laser welding to join medical-grade NiTi alloy with WE43 magnesium alloy. A comparative analysis was conducted on weld morphology, microstructure, tensile strength, and fracture surfaces between single-beam and dual-beam laser-welded joints, with additional investigation into the effects of pulsed current parameters on interfacial characteristics. The corrosion resistance of welded joints was subsequently evaluated. Results demonstrated that dual-beam laser welding produced joints with superior surface integrity and mechanical performance compared to single-beam processing. The maximum tensile strength of dual-beam welded NiTi/WE43 lap joints reached 141. 6 MPa. The bonding mechanism between NiTi and WE43 was primarily governed by elemental interdiffusion influenced by pulsed current parameters, with diffusion layer thickness initially increasing and subsequently decreasing with elevated laser power. Corrosion resistance at the joint interface was reduced relative to base materials due to interfacial defects and preferential Mg dissolution. Fractographic analysis revealed preserved ductile fracture characteristics in NiTi, whereas WE43 exhibited a brittle-ductile mixed fracture mode attributed to thermally induced grain coarsening in the heat-affected zone.

Zitieren

APA

ZHANG, C., XU, C., WANG, H., QI, M., ZHUANG, X., & DONG, X. (2025). Microstructure and Properties of Dual-beam Laser Welded Joints of Medical NiTi Alloy and WE43 Magnesium Alloy. Progress in Chinese Materials Sciences. https://doi.org/10.48014/pcms.20250420001

Vancouver

ZHANG C, XU C, WANG H, QI M, ZHUANG X, DONG X. Microstructure and Properties of Dual-beam Laser Welded Joints of Medical NiTi Alloy and WE43 Magnesium Alloy. Progress in Chinese Materials Sciences. 2025. doi:10.48014/pcms.20250420001

BibTeX
@article{ZHANG2025,
  author = {ZHANG, Chunxu and XU, Chang and WANG, Hongyang and QI, Min and ZHUANG, Xijing and DONG, Xufeng},
  title = {Microstructure and Properties of Dual-beam Laser Welded Joints of Medical NiTi Alloy and WE43 Magnesium Alloy},
  journal = {Progress in Chinese Materials Sciences},
  year = {2025},
  doi = {10.48014/pcms.20250420001}
}
Kostenlos starten →