EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure, Mechanical Properties and Corrosion Performance of Laser-Welded NiTi Shape Memory Alloy in Simulated Body Fluid

A Rajesh Kannan iD, N Siva Shanmugam iD, V Rajkumar, M Vishnukumar iD, S G Channabasavanna iD, Junho Oh, Than Trong Khanh Dat iD, Jonghun Yoon iD

Materials · 29.09.2024 · 17 (19) · 4801

DOI: 10.3390/ma17194801 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.09.2024. Verfasst von A Rajesh Kannan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, BK21 FOUR ERICA-ACE Center, Hanyang University, 55, Hanyangdaehak-ro, Sangnok-gu, Ansan 15588, Gyeonggi-do, Rep…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: KOREA HYDRO & NUCLEAR POWER CO., LTD, Ministry of Science and ICT, Ministry of Trade, Industry and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser-welding is a promising technique for welding NiTi shape memory alloys with acceptable tensile strength and comparable corrosion performance for biomedical applications. The microstructural characteristics and localized corrosion behavior of NiTi alloys in a simulated body fluid (SBF) environment are evaluated. A microstructural examination indicated the presence of fine and equiaxed grains with a B2 austenite phase in the base metal (BM), while the weld metal (WM) had a coarse dendritic microstructure with intermetallic precipitates including Ti2Ni and Ni4Ti3. The hardness decreased from the BM to the WM, and the average hardness for the BM was 352 ± 5 HV, while it ranged between 275 and 307 HV and 265 and 287 HV for the HAZ and WM, respectively. Uni-axial tensile tests revealed a substantial decrease in the tensile strength of NiTi WM (481 ± 19 MPa), with a reduced joint efficiency of 34%. The localized corrosion performance of NiTi BM was superior to the WM, with electrochemical test responses indicating a pitting potential and low corrosion rate in SBF environments. The corrosion rate of the NiTi BM and WM was 0.048 ± 0.0018 mils per year (mpy) and 0.41 ± 0.019 mpy, respectively. During welding, NiTi’s strength and biocompatibility properties changed due to the alteration in microstructure and formation of intermetallic phases as a result of Ti enrichment. The performance and safety of welded medical devices may be impacted during welding, and it is essential to preserve the biocompatibility of NiTi components for biomedical applications.

Schlagwörter

Stichwörter der Autor:innen

NiTicorrosionlaser-weldingmicrostructureshape memory alloysimulated body fluid

Autor:innen und Institutionen

  • Department of Mechanical Engineering, BK21 FOUR ERICA-ACE Center, Hanyang University, 55, Hanyangdaehak-ro, Sangnok-gu, Ansan 15588, Gyeonggi-do, Republic of Korea.
  • Department of Mechanical Engineering, National Institute of Technology, Tiruchirappalli 620015, Tamil Nadu, India.
  • Department of Mechanical Engineering, Coimbatore Institute of Engineering and Technology, Coimbatore 641109, Tamil Nadu, India.
  • Department of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli 620015, Tamil Nadu, India.
  • Department of Mechanical Engineering, Sri Jayachamarajendra College of Engineering, JSS Science and Technology University, Mysuru 570006, Karnataka, India.
  • Faculty of Mechanical Engineering, Ho Chi Minh City University of Technology (HCMUT), 268 Ly Thuong Kiet Street, District 10, Ho Chi Minh City 700000, Vietnam.

ORCID-Profile: A Rajesh Kannan, N Siva Shanmugam, M Vishnukumar, S G Channabasavanna, Than Trong Khanh Dat, Jonghun Yoon

Förderung

  • KOREA HYDRO & NUCLEAR POWER CO., LTD
  • Ministry of Science and ICT
  • Ministry of Trade, Industry and Energy
  • the Korea government (MSIT)
  • the Ministry of Trade, Industry & Energy (MOTIE, Korea)
  • the Korea Institute for Advancement of Technology (KIAT)
  • the National Research Foundation of Kore a (NRF)

Zitieren

APA

Kannan, A. R., Shanmugam, N. S., Rajkumar, V., Vishnukumar, M., Channabasavanna, S. G., Oh, J., Dat, T. T. K., & Yoon, J. (2024). Microstructure, Mechanical Properties and Corrosion Performance of Laser-Welded NiTi Shape Memory Alloy in Simulated Body Fluid. Materials, 17(19), 4801. https://doi.org/10.3390/ma17194801

Vancouver

Kannan AR, Shanmugam NS, Rajkumar V, Vishnukumar M, Channabasavanna SG, Oh J, et al. Microstructure, Mechanical Properties and Corrosion Performance of Laser-Welded NiTi Shape Memory Alloy in Simulated Body Fluid. Materials. 2024;17(19):4801. doi:10.3390/ma17194801

BibTeX
@article{Kannan2024,
  author = {Kannan, A Rajesh and Shanmugam, N Siva and Rajkumar, V and Vishnukumar, M and Channabasavanna, S G and Oh, Junho and Dat, Than Trong Khanh and Yoon, Jonghun},
  title = {Microstructure, Mechanical Properties and Corrosion Performance of Laser-Welded NiTi Shape Memory Alloy in Simulated Body Fluid},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {19},
  pages = {4801},
  doi = {10.3390/ma17194801}
}
Kostenlos starten →