Typical Size Measurement Method for Fuel Components Based on Degraded Images
Frontiers of Chinese Mechanical Engineering and Technology · 2025
DOI: 10.48014/fcmet.20250903001 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers of Chinese Mechanical Engineering and Technology, 2025. Verfasst von Guoping REN und 2 weiteren Autor:innen.
Abstract (Originalsprache)
The measurement of typical dimensions of spent fuel assemblies is of great significance for ensuring the safe operation of pressurized water reactors. In response to the task of measuring typical dimensions of spent fuel assemblies, this article introduces a method for measuring typical dimensions of fuel assemblies based on degraded images. In this method, the image is first preprocessed, including using an improved median filter to remove image radiation noise, using multi frame. images and Wiener filtering to remove image thermal disturbances, and using Radon transform. to correct fuel rod tilt; Then, the pixel scale of the image is calibrated using a ruler, and the edges of the fuel rod and the frame. are extracted using a grayscale projection based method. The upper and lower plugs of the fuel assembly are matched and located using a template matching method; Finally, based on the calibrated pixel scale and the pixel size obtained from feature detection, the typical dimensions of the fuel assembly, such as fuel rod diameter, grid width, and upper and lower plug distances, are calculated. Subsequently, theoretical accuracy analysis was conducted on the proposed method, and the results showed that the measurement accuracy of this method is linearly correlated with pixel scale and edge detection error. Finally, precision verification experiments were conducted, and the results showed that the measurement accuracy of fuel rod diameter was less than ± 0. 05mm, the measurement accuracy of end plug distance was less than ±0. 3mm, and the measurement accuracy of grid width was less than ±0. 5mm, which has certain practical value.
Zitieren
APA
REN, G., CHEN, R., & LI, W. (2025). Typical Size Measurement Method for Fuel Components Based on Degraded Images. Frontiers of Chinese Mechanical Engineering and Technology. https://doi.org/10.48014/fcmet.20250903001
Vancouver
REN G, CHEN R, LI W. Typical Size Measurement Method for Fuel Components Based on Degraded Images. Frontiers of Chinese Mechanical Engineering and Technology. 2025. doi:10.48014/fcmet.20250903001
BibTeX
@article{REN2025,
author = {REN, Guoping and CHEN, Rui and LI, Wenpan},
title = {Typical Size Measurement Method for Fuel Components Based on Degraded Images},
journal = {Frontiers of Chinese Mechanical Engineering and Technology},
year = {2025},
doi = {10.48014/fcmet.20250903001}
}
EUVIMED