EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Measurement Method of Fuel Nozzle Cone Angle Based on Point Cloud Slicing

Yeni Li, Zusheng Lin, Xiaodong Tang

Micromachines · 09.06.2026 · 17 (6) · 706

DOI: 10.3390/mi17060706 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 09.06.2026. Verfasst von Yeni Li und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Automotive Engineering, Xiamen University of Technology, Xiamen 361024, China. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Talent Development Project, Fujian Province Science and Technology Commissioner Project, Fujian Province Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the issues of low efficiency and large errors in traditional dimensional measurement strategies for fuel nozzles, this paper proposes an improved region-constrained Random Sample Consensus (RANSAC) circle fitting method for high-precision measurement of the inner hole cone angle. Three-dimensional point clouds are extracted using a shape-from-focus method. The point cloud slices are then projected onto a two-dimensional plane, and the slice edges are extracted. Based on the edge shape distribution, the candidate point selection strategy of RANSAC is optimized: the initial circle is divided into eight sector regions, and three points are randomly selected from three distinct regions to fit candidate circles. After multiple iterations, the optimal fitting circle is obtained. A comparative analysis is conducted among the least squares method, standard RANSAC, and the proposed algorithm, with three quantitative metrics—residual standard deviation (σ), root mean square error (RMSE), and inlier ratio (ε)—introduced to evaluate the fitting quality. Experimental results show that the proposed region-constrained RC-RANSAC method achieves the best performance among the three, yielding σ = 2.826 px, RMSE = 2.826 px, and ε = 95.2%, and attains a cone angle deviation of only 1.0°, which closely agrees with Keyence ultra-depth measurements (error 0.8°). This method provides a new approach for accurate and robust cone angle measurement of fuel nozzle inner holes.

Schlagwörter

Stichwörter der Autor:innen

RC-RANSACcircle fittingcone angle measurementpoint cloud preprocessingpoint cloud slicing

Autor:innen und Institutionen

  • College of Mechanical and Automotive Engineering, Xiamen University of Technology, Xiamen 361024, China.

Förderung

  • Talent Development Project
  • Fujian Province Science and Technology Commissioner Project
  • Fujian Province Natural Science Foundation
  • Fujian Province Science and Technology Innovation Platform Project

Zitieren

APA

Li, Y., Lin, Z., & Tang, X. (2026). Measurement Method of Fuel Nozzle Cone Angle Based on Point Cloud Slicing. Micromachines, 17(6), 706. https://doi.org/10.3390/mi17060706

Vancouver

Li Y, Lin Z, Tang X. Measurement Method of Fuel Nozzle Cone Angle Based on Point Cloud Slicing. Micromachines. 2026;17(6):706. doi:10.3390/mi17060706

BibTeX
@article{Li2026,
  author = {Li, Yeni and Lin, Zusheng and Tang, Xiaodong},
  title = {Measurement Method of Fuel Nozzle Cone Angle Based on Point Cloud Slicing},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {6},
  pages = {706},
  doi = {10.3390/mi17060706}
}
Kostenlos starten →