EUVIMEDEUVIMED entdecken
Crossref

Finite Element Analysis of Seismic Performance of RCS Hybrid Joints of Steel Hoop Structure

Tianzheng NI, Yingying ZHANG, Yushuai ZHAO, Junhao XU

Bulletin of Chinese Civil Engineering · 2024

DOI: 10.48014/bcce.20240207001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bulletin of Chinese Civil Engineering, 2024. Verfasst von Tianzheng NI und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reinforced concrete column-steel beam (RCS) composite structures are widely used in super highrise buildings due to their excellent performance. In this paper, the numerical simulation analysis of the RCS hybrid joints of “beam through” and “column through” RCS constructed with steel hoop structure are carried out, and the influence of five different parameters, i. e. , flange width-thickness ratio, steel yield strength, axial compression ratio, concrete strength and end plate thickness, on the seismic performance and failure mode of RCS hybrid joints is investigated. The results show that the ABAQUS finite element model can simulate the performance of RCS mixing under static load through reasonable parameter settings, which is in good agreement with the experimental results. Under the mechanism of “strong column and weak beam”, the combined node firstly undergoes beam-hinge damage, and the change of the axial compression ratio and the concrete strength parameter of the joint have little effect on the ultimate bearing capacity and deformation performance of the joint. Increasing the flange width-thickness ratio reduces the bearing capacity of the joint by up to 11%, and increases the yield strength of the steel, and increases the bearing capacity of the joint by 36. 4%. The thickness of the end plate of the column through specimen is increased, and the bearing capacity and deformation performance of the joint are improved to a certain extent. The changes of each parameter have no significant effect on the final plastic hinge failure mode of the joint. The research in this paper provides theoretical support for the design and research of this type of node in the future.

Zitieren

APA

NI, T., ZHANG, Y., ZHAO, Y., & XU, J. (2024). Finite Element Analysis of Seismic Performance of RCS Hybrid Joints of Steel Hoop Structure. Bulletin of Chinese Civil Engineering. https://doi.org/10.48014/bcce.20240207001

Vancouver

NI T, ZHANG Y, ZHAO Y, XU J. Finite Element Analysis of Seismic Performance of RCS Hybrid Joints of Steel Hoop Structure. Bulletin of Chinese Civil Engineering. 2024. doi:10.48014/bcce.20240207001

BibTeX
@article{NI2024,
  author = {NI, Tianzheng and ZHANG, Yingying and ZHAO, Yushuai and XU, Junhao},
  title = {Finite Element Analysis of Seismic Performance of RCS Hybrid Joints of Steel Hoop Structure},
  journal = {Bulletin of Chinese Civil Engineering},
  year = {2024},
  doi = {10.48014/bcce.20240207001}
}
Kostenlos starten →