EUVIMEDEUVIMED entdecken
Crossref

Design of Electrical Test Device for Automotive Industry

Kadir VARDAR, Fırat AYDEMİR, Durmuş ÖZDEMİR, Mustafa TOPUZ, Burakcan KOLAY, Yusuf YILDIRIM, Zehra BİLİCİ, Mustafa Uhud BAYDOĞRUL, Yunus Emre YAĞAN, Bünyamin KAYA, Ali TANDOĞAN, Ethem Yiğit GÜRER

International Scientific and Vocational Studies Journal · 2021

DOI: 10.47897/bilmes.1012005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Scientific and Vocational Studies Journal, 2021. Verfasst von Kadir VARDAR und 11 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 9 Literaturangaben. Gefördert von: Tübitak TEYDEB 1505.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a test device has been developed that can be used to test various vehicle cables and cable harnesses in the automotive sector. The test device can perform basic measurements such as conductivity, short circuit, voltage, resistance, capacity, and specific measurements such as diodes and active relays among the number of test points varying between 128-1024. It performs the programmed tests step by step by processing the Test Source Code (*.tkk) files prepared with the designed Interface Program, loaded from the SD memory card in the device. The tester system consists of a selection of test source codes to be run and a general-purpose USB barcode reader, a general-purpose barcode printer, external LED units, an Optional External Unit (OHB) that offer a larger screen and various features if desired, and monitor. The OHB unit can be a Raspberry PI based mini-computer that can be mounted inside or outside the device, or any Windows based computer or Industrial computer can be used if desired. The test device realized has been operated stably with all its functions and has been successfully tested.

Förderung

  • Tübitak TEYDEB 1505

Zitieren

APA

VARDAR, K., AYDEMİR, F., ÖZDEMİR, D., TOPUZ, M., KOLAY, B., YILDIRIM, Y., BİLİCİ, Z., BAYDOĞRUL, M. U., YAĞAN, Y. E., KAYA, B., TANDOĞAN, A., & GÜRER, E. Y. (2021). Design of Electrical Test Device for Automotive Industry. International Scientific and Vocational Studies Journal. https://doi.org/10.47897/bilmes.1012005

Vancouver

VARDAR K, AYDEMİR F, ÖZDEMİR D, TOPUZ M, KOLAY B, YILDIRIM Y, et al. Design of Electrical Test Device for Automotive Industry. International Scientific and Vocational Studies Journal. 2021. doi:10.47897/bilmes.1012005

BibTeX
@article{VARDAR2021,
  author = {VARDAR, Kadir and AYDEMİR, Fırat and ÖZDEMİR, Durmuş and TOPUZ, Mustafa and KOLAY, Burakcan and YILDIRIM, Yusuf and BİLİCİ, Zehra and BAYDOĞRUL, Mustafa Uhud and YAĞAN, Yunus Emre and KAYA, Bünyamin and TANDOĞAN, Ali and GÜRER, Ethem Yiğit},
  title = {Design of Electrical Test Device for Automotive Industry},
  journal = {International Scientific and Vocational Studies Journal},
  year = {2021},
  doi = {10.47897/bilmes.1012005}
}
Kostenlos starten →