EUVIMEDEUVIMED entdecken
Crossref

DESIGN AND REALIZATION OF A PROFILE NOTCHING DEVICE FOR AUTOMOTIVE ELASTOMER COMPONENTS

Claudiu BAIAȘ, Dennis FRENȚIU, Alexandru MINA

Journal of Marine Technology and Environment · 01.12.2026 · 2026 (3) · 19-22

DOI: 10.53464/jmte.03.2026.02 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Marine Technology and Environment, online erschienen am 01.11.2026. Verfasst von Claudiu BAIAȘ und 2 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the engineering design and constructive realization route of a profile notching device intended for automotive elastomer components manufactured in small and medium batches. Secondary profiling operations on rubber-based parts are difficult because elastomers combine low stiffness, large recoverable deformation, and sensitivity to local compression, which can generate dimensional scatter, tearing, or edge defects when conventional manual trimming is used. The proposed solution is a compact bench-mounted device built around a guided profiled punch, a dedicated locating nest, a stripper plate, an adjustable stop, and interchangeable cutting inserts. The study follows a structured design methodology including functional analysis, concept selection, preliminary force sizing, material selection, and risk-oriented constructive detailing. A representative load case is used to dimension the lever mechanism, punch holder, and frame under conservative assumptions. The resulting solution emphasizes repeatability, fast changeover, operator safety, and easy workshop manufacturing. The paper therefore offers a realistic mechanical-design basis for controlled notching of seals, gaskets, and similar elastomeric parts used in automotive assemblies.

Zitieren

APA

BAIAȘ, C., FRENȚIU, D., & MINA, A. (2026). DESIGN AND REALIZATION OF A PROFILE NOTCHING DEVICE FOR AUTOMOTIVE ELASTOMER COMPONENTS. Journal of Marine Technology and Environment, 2026(3), 19-22. https://doi.org/10.53464/jmte.03.2026.02

Vancouver

BAIAȘ C, FRENȚIU D, MINA A. DESIGN AND REALIZATION OF A PROFILE NOTCHING DEVICE FOR AUTOMOTIVE ELASTOMER COMPONENTS. Journal of Marine Technology and Environment. 2026;2026(3):19-22. doi:10.53464/jmte.03.2026.02

BibTeX
@article{BAIA2026,
  author = {BAIAȘ, Claudiu and FRENȚIU, Dennis and MINA, Alexandru},
  title = {DESIGN AND REALIZATION OF A PROFILE NOTCHING DEVICE FOR AUTOMOTIVE ELASTOMER COMPONENTS},
  journal = {Journal of Marine Technology and Environment},
  year = {2026},
  volume = {2026},
  number = {3},
  pages = {19--22},
  doi = {10.53464/jmte.03.2026.02}
}
Kostenlos starten →