Application of surface modifiers in ceramic tile to improve adhesion strength with mortars
Journal of Urban Technology and Sustainability · 2019
DOI: 10.47842/juts.v2i1.10 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Urban Technology and Sustainability, 2019. Verfasst von Bruna Bulzico und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Nowadays, ceramic floor or wall tiles have been composed mainly of large ceramic tiles with low water absorption, which requires a greater need for bond strength between the tile and the adhesive mortar. Some researchers argue that adhesion is obtained mainly by mechanical interlocking, while othersclaim that adhesion is obtained mainly by increasing the contact surface. To provide this increase in the contact surface, some studies indicate the use of surface modifiers on the back of the ceramic plate. Thus, this research aimed to evaluate the influence of surface treatment on tensile strength. The research showed that factors such as the polymer content of the adhesive mortar, the absorption and the roughness of the ceramic back were more influential in the tensile strength than the use of the mentioned surface treatments.
Zitieren
APA
Bulzico, B., Resende, M. M., & Herrera-Mesén, C. (2019). Application of surface modifiers in ceramic tile to improve adhesion strength with mortars. Journal of Urban Technology and Sustainability. https://doi.org/10.47842/juts.v2i1.10
Vancouver
Bulzico B, Resende MM, Herrera-Mesén C. Application of surface modifiers in ceramic tile to improve adhesion strength with mortars. Journal of Urban Technology and Sustainability. 2019. doi:10.47842/juts.v2i1.10
BibTeX
@article{Bulzico2019,
author = {Bulzico, Bruna and Resende, Maurício M. and Herrera-Mesén, Carlos},
title = {Application of surface modifiers in ceramic tile to improve adhesion strength with mortars},
journal = {Journal of Urban Technology and Sustainability},
year = {2019},
doi = {10.47842/juts.v2i1.10}
}
EUVIMED