Penentuan Kadar Aspal Optimum pada Campuran CPHMA Menggunakan Asbuton B30/50
Jurnal Sains dan Teknologi (JSIT) · 27.05.2026 · 6 (2) · 381-396
DOI: 10.47233/jsit.v6i2.4677 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Sains dan Teknologi (JSIT), online erschienen am 27.05.2026. Verfasst von Adi Mas Cahyo und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Road pavement damage such as cracking and plastic deformation is influenced by the quality of binding materials and improper mixture composition, therefore an asphalt mixture innovation is required to improve pavement performance. The use of Cold Paving Hot Mix Asbuton (CPHMA) with Asbuton B30/50 is considered an alternative for utilizing local materials; however, improper asphalt content control may cause the mixture to become excessively rigid or overly plastic. Therefore, this study aims to analyze the effect of asphalt content variation on the Marshall characteristics of CPHMA mixtures using Asbuton B30/50 and to determine the Optimum Asphalt Content (OAC). The study was conducted using asphalt content variations of 6%, 6.5%, 7%, 7.5%, and 8%. Testing was carried out based on the 2018 Revised 2 Bina Marga General Specifications using the Marshall method to obtain stability, flow, Void in Mix (VIM), Void in Mineral Aggregate (VMA), Void Filled with Bitumen (VFB), and residual stability parameters. The results showed that increasing asphalt content caused the stability value to increase from 496 kg at 6% asphalt content to 556 kg at 7%, then decrease to 517 kg at 8%. The values of flow and VFB increased, while VIM and VMA decreased due to the reduction of air voids in the mixture. Increasing asphalt content made the mixture denser and improved aggregate bonding, but reduced the mixture porosity. Based on the Marshall analysis, 7% asphalt content was selected because it provided the best balance between stability, flexibility, and mixture durability.
Zitieren
APA
Cahyo, A. M., Hartatik, N., Safitri, D. A., & Ervitasari, S. Y. (2026). Penentuan Kadar Aspal Optimum pada Campuran CPHMA Menggunakan Asbuton B30/50. Jurnal Sains dan Teknologi (JSIT), 6(2), 381-396. https://doi.org/10.47233/jsit.v6i2.4677
Vancouver
Cahyo AM, Hartatik N, Safitri DA, Ervitasari SY. Penentuan Kadar Aspal Optimum pada Campuran CPHMA Menggunakan Asbuton B30/50. Jurnal Sains dan Teknologi (JSIT). 2026;6(2):381-396. doi:10.47233/jsit.v6i2.4677
BibTeX
@article{Cahyo2026,
author = {Cahyo, Adi Mas and Hartatik, Nurani and Safitri, Dika Ayu and Ervitasari, Siska Yovina},
title = {Penentuan Kadar Aspal Optimum pada Campuran CPHMA Menggunakan Asbuton B30/50},
journal = {Jurnal Sains dan Teknologi (JSIT)},
year = {2026},
volume = {6},
number = {2},
pages = {381--396},
doi = {10.47233/jsit.v6i2.4677}
}
EUVIMED