Enhancing the Efficiency of the Savonius Hydro Turbine in Pipe Through Design Optimization and Computational Fluid Dynamics Flow Modeling
Journal of Applied Fluid Mechanics · 01.08.2026 · 19 (8)
DOI: 10.47176/jafm.19.8.3977 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Fluid Mechanics, online erschienen am 01.08.2026. Verfasst von S. Nuyam und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This work explores the performance improvement of a Savonius Hydro Turbine (SHT) installed inside a 4-inch pipeline by examining the combined effects of the guide-vane angle and central-shaft opening ratio were assessed through Computational Fluid Dynamics simulations supported by experimental measurements. Five turbine configurations (M5-1 to M5-5) were analyzed with the SST-enhanced k–ω turbulence formulation under guide-vane angles of 0°, 25°, 30°, and 35°. The results revealed that both parameters significantly influence the flow field and turbine efficiency. The central-shaft opening reduces reverse flow and torque reversal acting on the retreating blade, whereas the guide vane channels the incoming stream toward the forward-moving blade. Among all configurations, the M5-3 turbine (30 % opening, 35° guide vane) exhibited the most favorable performance, yielding maximum power coefficient (Cp,max) value of 0.3969 (simulation) and 0.3778 (experiment) at Tip Speed Ratio (TSR) close to 0.59. These represent 233 % and 257 % improvements, respectively, compared with the case without a guide vane (M5-3, 0° guide vane). Compared with the solid-shaft turbine (M5-1, 35° guide vane), Cp increased by 48 % (simulation) and 55 % (experiment). The deviation between simulated and experimental Cp ranged from 5.06 % to 12.38 %, decreasing with increasing guide-vane angle, validating the CFD predictions. The combination of a 30 % central-shaft opening and a 35° guide-vane angle produced the most efficient flow interaction, showing strong potential for low-head, in-pipe hydropower recovery in industrial and municipal pipeline systems.
Zitieren
APA
Nuyam, S., Suntivarakorn, R., Thanatwutthikorn, K., & Vengsungnle, P. (2026). Enhancing the Efficiency of the Savonius Hydro Turbine in Pipe Through Design Optimization and Computational Fluid Dynamics Flow Modeling. Journal of Applied Fluid Mechanics, 19(8). https://doi.org/10.47176/jafm.19.8.3977
Vancouver
Nuyam S, Suntivarakorn R, Thanatwutthikorn K, Vengsungnle P. Enhancing the Efficiency of the Savonius Hydro Turbine in Pipe Through Design Optimization and Computational Fluid Dynamics Flow Modeling. Journal of Applied Fluid Mechanics. 2026;19(8). doi:10.47176/jafm.19.8.3977
BibTeX
@article{Nuyam2026,
author = {Nuyam, S. and Suntivarakorn, R. and Thanatwutthikorn, K. and Vengsungnle, P.},
title = {Enhancing the Efficiency of the Savonius Hydro Turbine in Pipe Through Design Optimization and Computational Fluid Dynamics Flow Modeling},
journal = {Journal of Applied Fluid Mechanics},
year = {2026},
volume = {19},
number = {8},
doi = {10.47176/jafm.19.8.3977}
}
EUVIMED