New vacuum chamber of the bending part of the injection channel of the nsc kipt sca “neutron source”
Problems of Atomic Science and Technology · 28.10.2026 · 84
DOI: 10.46813/2026-165-084 ↗Kurz gefasst
Fachartikel in der Zeitschrift Problems of Atomic Science and Technology, online erschienen am 28.10.2026. Verfasst von A.V. Gevchuk und 5 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben.
Abstract (Originalsprache)
The Subcritical Assembly “Neutron Source” of the National Science Center “Kharkiv Institute of Physics and Technology” is an Accelerator Driven System facility with 100 MeV/100 kW electron linear accelerator as a driver and tungsten neutron generating target as a source of the primary neutrons. To provide 100 MeV/100 kW electron beam delivery from the exit of the linear accelerator to the neutron generating target without electron beam losses it is necessary to provide the residual gas pressure in the vacuum chamber of the transportation channel of about 10⁻⁸…10⁻⁹ Torr and set the electron beam at the center of the target. The possibility to install and operate electron beam parameters and position monitoring equipment in the chamber should be realized. In the article the reasons and technical solutions for the vacuum chamber of the second 45 degree bending magnet of the electron beam transportation channel for National Science Center “Kharkiv Institute of Physics and Technology” Subcritical assembly “Neutron Source” redesign are described. The methods and conditions for providing the residual gas pressure, which were included in the original design, are presented. The diagnostic equipment should be operated under hard radiation conditions. The developed bending magnet vacuum chamber design, manufacturing and vacuum test results before and after the chamber implementation in the accelerator vacuum system are presented. The results of the new chamber installation and operation provided the successful physical start-up and further pilot operation of the National Science Center “Kharkiv Institute of Physics and Technology” Subcritical Assembly “Neutron Source” facility.
Zitieren
APA
Gevchuk, A., Gordienko, A., Grevtsev, V., Karnaukhov, I., Mytsykov, A., & Zelinsky, А. (2026). New vacuum chamber of the bending part of the injection channel of the nsc kipt sca “neutron source”. Problems of Atomic Science and Technology, 84. https://doi.org/10.46813/2026-165-084
Vancouver
Gevchuk A, Gordienko A, Grevtsev V, Karnaukhov I, Mytsykov A, Zelinsky А. New vacuum chamber of the bending part of the injection channel of the nsc kipt sca “neutron source”. Problems of Atomic Science and Technology. 2026:84. doi:10.46813/2026-165-084
BibTeX
@article{Gevchuk2026,
author = {Gevchuk, A.V. and Gordienko, A.N. and Grevtsev, V.G. and Karnaukhov, I.M. and Mytsykov, A.O. and Zelinsky, А.Yu.},
title = {New vacuum chamber of the bending part of the injection channel of the nsc kipt sca “neutron source”},
journal = {Problems of Atomic Science and Technology},
year = {2026},
pages = {84},
doi = {10.46813/2026-165-084}
}
EUVIMED