EUVIMEDEUVIMED entdecken
Crossref

Tribological characteristics of samples made from titanium alloy VT5 nitrided in plasma glow discharge

Alex Sagalovych, Vladislav Sagalovych, Viktor Popov, Stanislav Dudnik, Oleksandr Olijnyk

Tribology and Materials · 2022

DOI: 10.46793/tribomat.2022.013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tribology and Materials, 2022. Verfasst von Alex Sagalovych und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of nitriding of VT5 alloy (3.7115) in the plasma of a glow discharge excited in a hollow cathode on its tribological characteristics in pairs with different materials in jet fuel TS-1 and under dry sliding conditions has been studied. For research and tribological tests, samples of VT5 alloy were nitrided in the plasma of a glow discharge excited in a hollow cathode at a temperature of 975 ± 15 °C and a pressure of 58 ± 2 Pa in a nitrogen-argon gas mixture with a nitrogen content of 78 vol. %. Tribological tests were performed on a friction machine 2070 SMT-1 according to the scheme "cube-roller". Tests under conditions of sliding with jet fuel TS-1 were performed at a load of 200 N. The sliding speed during the tests was 1.3 m/s, and the test time was 75 s. The test under dry sliding conditions was carried out at a load of 100 N and a sliding speed of 0.785 m/s. The test time was 30 minutes. It is shown that the nitrided VT5 alloy in friction pairs with several materials has rather low wear values (≤ 2.26 × 10–6 mm3/Nm), as well as a coefficient of friction at the level of 0.08 to 0.12.

Zitieren

APA

Sagalovych, A., Sagalovych, V., Popov, V., Dudnik, S., & Olijnyk, O. (2022). Tribological characteristics of samples made from titanium alloy VT5 nitrided in plasma glow discharge. Tribology and Materials. https://doi.org/10.46793/tribomat.2022.013

Vancouver

Sagalovych A, Sagalovych V, Popov V, Dudnik S, Olijnyk O. Tribological characteristics of samples made from titanium alloy VT5 nitrided in plasma glow discharge. Tribology and Materials. 2022. doi:10.46793/tribomat.2022.013

BibTeX
@article{Sagalovych2022,
  author = {Sagalovych, Alex and Sagalovych, Vladislav and Popov, Viktor and Dudnik, Stanislav and Olijnyk, Oleksandr},
  title = {Tribological characteristics of samples made from titanium alloy VT5 nitrided in plasma glow discharge},
  journal = {Tribology and Materials},
  year = {2022},
  doi = {10.46793/tribomat.2022.013}
}
Kostenlos starten →