EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion Behavior of Nitrided Layer of Ti6Al4V Titanium Alloy by Hollow Cathodic Plasma Source Nitriding

Lei Zhang, Minghao Shao, Zhehao Zhang, Xuening Yi, Jiwen Yan, Zelong Zhou, Dazhen Fang, Yongyong He, Yang Li iD

Materials · 07.04.2023 · 16 (8) · 2961

DOI: 10.3390/ma16082961 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.04.2023. Verfasst von Lei Zhang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Electromechanical Automobile Engineering, Yantai University, Yantai 264005, China. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ti6Al4V titanium alloys, with high specific strength and good biological compatibility with the human body, are ideal materials for medical surgical implants. However, Ti6Al4V titanium alloys are prone to corrosion in the human environment, which affects the service life of implants and harms human health. In this work, hollow cathode plasm source nitriding (HCPSN) was used to generate nitrided layers on the surfaces of Ti6Al4V titanium alloys to improve their corrosion resistance. Ti6Al4V titanium alloys were nitrided in NH3 at 510 °C for 0, 1, 2, and 4 h. The microstructure and phase composition of the Ti-N nitriding layer was characterized by high-resolution transmission electron microscopy, atomic force microscopy, scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. This modified layer was identified to be composed of TiN, Ti2N, and α-Ti (N) phase. To study the corrosion properties of different phases, the nitriding 4 h samples were mechanically ground and polished to obtain the various surfaces of Ti2N and α-Ti (N) phases. The potentiodynamic polarization and electrochemical impedance measurements were conducted in Hank’s solution to characterize the corrosion resistance of Ti-N nitriding layers in the human environment. The relationship between corrosion resistance and the microstructure of the Ti-N nitriding layer was discussed. The new Ti-N nitriding layer that can improve corrosion resistance provides a broader prospect for applying Ti6Al4V titanium alloy in the medical field.

Schlagwörter

Stichwörter der Autor:innen

HRTEMTEMelectrochemical impedance spectroscopyplasma nitridingtitanium alloys

Autor:innen und Institutionen

  • School of Electromechanical Automobile Engineering, Yantai University, Yantai 264005, China.
  • State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China.
  • Department of Nuclear Equipment, Yantai University, Yantai 264005, China.

ORCID-Profile: Yang Li

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, L., Shao, M., Zhang, Z., Yi, X., Yan, J., Zhou, Z., Fang, D., He, Y., & Li, Y. (2023). Corrosion Behavior of Nitrided Layer of Ti6Al4V Titanium Alloy by Hollow Cathodic Plasma Source Nitriding. Materials, 16(8), 2961. https://doi.org/10.3390/ma16082961

Vancouver

Zhang L, Shao M, Zhang Z, Yi X, Yan J, Zhou Z, et al. Corrosion Behavior of Nitrided Layer of Ti6Al4V Titanium Alloy by Hollow Cathodic Plasma Source Nitriding. Materials. 2023;16(8):2961. doi:10.3390/ma16082961

BibTeX
@article{Zhang2023,
  author = {Zhang, Lei and Shao, Minghao and Zhang, Zhehao and Yi, Xuening and Yan, Jiwen and Zhou, Zelong and Fang, Dazhen and He, Yongyong and Li, Yang},
  title = {Corrosion Behavior of Nitrided Layer of Ti6Al4V Titanium Alloy by Hollow Cathodic Plasma Source Nitriding},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {8},
  pages = {2961},
  doi = {10.3390/ma16082961}
}
Kostenlos starten →