Effects of Bending and Re-bending on Mechanical Properties of Locally-Manufactured Steel Rebars
Tanzania Journal of Science · 30.04.2024 · 50 (1) · 62-74
DOI: 10.4314/tjs.v50i1.5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tanzania Journal of Science, online erschienen am 30.04.2024. Verfasst von Patrick W Waruhiu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).
Abstract (Originalsprache)
Steel rebars experience deformation when subjected to bending and re-bending operations. Subsequently, their microstructures are impaired thus affecting the mechanical properties and leading to failure. This study establishes the effects of bending and re-bending the steel rebars on the mechanical properties. Experiments were conducted to determine the effects of bending and re-bending of the steel rebars. Testing was conducted on Ten virgin and Thirty specimens which were bent and re-bent at 45º, 90º, and 180º, and followed by tensile tests. Yield strength, ultimate tensile strength, elongation, and ultimate tensile strength to yield strength ratio (Rm/Re), were recorded. Results showed the yield strength, ultimate tensile strength, elongation, and Rm/Re of virgin steel rebars varied from 553.62 MPa to 618.49 MPa, 634.39 MPa to 745.68 MPa, 17.6 % to 21.67 %, and 1.14 to 1.19. The yield strength, ultimate tensile strength, elongation, and Rm / Re of bent and re-bent steel rebars at angles of 45º, 90º, and 180º varied from 603.67 MPa to 677.38 MPa, 692.82 MPa to 751.76 MPa, 6.88 % to 19 % and 1.09 to 1.21. It was established that bending and re-bending increase strength and reduce the ductility of the rebars proportionally.
Zitieren
APA
Waruhiu, P. W., Marandu, S. I., I, M., & Mgwatu (2024). Effects of Bending and Re-bending on Mechanical Properties of Locally-Manufactured Steel Rebars. Tanzania Journal of Science, 50(1), 62-74. https://doi.org/10.4314/tjs.v50i1.5
Vancouver
Waruhiu PW, Marandu SI, I M, Mgwatu. Effects of Bending and Re-bending on Mechanical Properties of Locally-Manufactured Steel Rebars. Tanzania Journal of Science. 2024;50(1):62-74. doi:10.4314/tjs.v50i1.5
BibTeX
@article{Waruhiu2024,
author = {Waruhiu, Patrick W and Marandu, Simon I and I, Mussa and Mgwatu},
title = {Effects of Bending and Re-bending on Mechanical Properties of Locally-Manufactured Steel Rebars},
journal = {Tanzania Journal of Science},
year = {2024},
volume = {50},
number = {1},
pages = {62--74},
doi = {10.4314/tjs.v50i1.5}
}
EUVIMED