EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Different Coatings, Primers, and Additives on Corrosion of Steel Rebars

Alireza Afshar, Soheil Jahandari iD, Haleh Rasekh, Aida Rahmani, Mohammad Saberian

Polymers · 13.03.2023 · 15 (6) · 1422

DOI: 10.3390/polym15061422 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.03.2023. Verfasst von Alireza Afshar und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Environmental Engineering, George Mason University, Fairfax, VA 22030, USA. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research, methods of increasing the corrosion resistance of reinforced concrete were experimentally investigated. The study used silica fume and fly ash at optimized percentages of 10 and 25% by cement weight, polypropylene fibers at a ratio of 2.5% by volume of concrete, and a commercial corrosion inhibitor, 2-dimethylaminoethanol (Ferrogard 901), at 3% by cement weight. The corrosion resistance of three types of reinforcements, mild steel (STt37), AISI 304 stainless steel, and AISI 316 stainless steel, was investigated. The effects of various coatings, including hot-dip galvanizing, alkyd-based primer, zinc-rich epoxy primer, alkyd top coating, polyamide epoxy top coating, polyamide epoxy primer, polyurethane coatings, a double layer of alkyd primer and alkyd top coating, and a double layer of epoxy primer and alkyd top coating, were evaluated on the reinforcement surface. The corrosion rate of the reinforced concrete was determined through results of accelerated corrosion and pullout tests of steel-concrete bond joints and stereographic microscope images. The samples containing pozzolanic materials, the corrosion inhibitor, and a combination of the two showed significant improvement in corrosion resistance by 7.0, 11.4, and 11.9 times, respectively, compared to the control samples. The corrosion rate of mild steel, AISI 304, and AISI 316 decreased by 1.4, 2.4, and 2.9 times, respectively, compared to the control sample; however, the presence of polypropylene fibers reduced the corrosion resistance by 2.4 times compared to the control.

Schlagwörter

Stichwörter der Autor:innen

accelerated corrosioncoating systemsinhibitorspozzolanic materialspullout test of steel–concrete bond jointsrebars

Autor:innen und Institutionen

  • Department of Civil and Environmental Engineering, George Mason University, Fairfax, VA 22030, USA.
  • Centre for Infrastructure Engineering, Western Sydney University, Penrith, NSW 2751, Australia.
  • Chem Concrete Pty Ltd., Seven Hills, NSW 2147, Australia.
  • School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NSW 2007, Australia.
  • School of Engineering, RMIT University, Melbourne, VIC 3000, Australia.

ORCID-Profile: Soheil Jahandari

Zitieren

APA

Afshar, A., Jahandari, S., Rasekh, H., Rahmani, A., & Saberian, M. (2023). Effects of Different Coatings, Primers, and Additives on Corrosion of Steel Rebars. Polymers, 15(6), 1422. https://doi.org/10.3390/polym15061422

Vancouver

Afshar A, Jahandari S, Rasekh H, Rahmani A, Saberian M. Effects of Different Coatings, Primers, and Additives on Corrosion of Steel Rebars. Polymers. 2023;15(6):1422. doi:10.3390/polym15061422

BibTeX
@article{Afshar2023,
  author = {Afshar, Alireza and Jahandari, Soheil and Rasekh, Haleh and Rahmani, Aida and Saberian, Mohammad},
  title = {Effects of Different Coatings, Primers, and Additives on Corrosion of Steel Rebars},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1422},
  doi = {10.3390/polym15061422}
}
Kostenlos starten →