Effect of Paraffin Cutting Fluid Oil on Turning Performance of Cylindrical Mild Steel
Journal of Applied Sciences and Environmental Management · 09.05.2026 · 30 (4) · 1384-1388
DOI: 10.4314/jasem.v30i4.38 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Sciences and Environmental Management, online erschienen am 09.05.2026. Verfasst von A. I. Arum und 5 weiteren Autor:innen.
Abstract (Originalsprache)
The objective of this paper was to investigate the effect of paraffin cutting fluid oil on turning performance of cylindrical mild steel with focus on the tool wear using appropriate standard procedures. The experimental results from the 20 runs reveal observable variations in tool wear across different combinations of average cutting speed of 1092.50 (m/min), average feed rate of 0.285 (mm/rev), average depth cut of 1.05 (mm) and average tool wear of 2.13. The Tool wear values ranged approximately between 2.01 mm and 2.41 mm, indicating measurable wear progression under the selected cutting conditions. The machining experiments having cutting speed, feed rate, and depth of cut as process parameters was used in developing the responses data. The study reveals a great improvement on the tool wear measured, compared to results recorded in previous studies using soluble oil.
Zitieren
APA
Arum, A. I., Sinebe, J., Enyi, C. L., Ukrakpor, F., Ekpu, M., & Sada, S. O. (2026). Effect of Paraffin Cutting Fluid Oil on Turning Performance of Cylindrical Mild Steel. Journal of Applied Sciences and Environmental Management, 30(4), 1384-1388. https://doi.org/10.4314/jasem.v30i4.38
Vancouver
Arum AI, Sinebe J, Enyi CL, Ukrakpor F, Ekpu M, Sada SO. Effect of Paraffin Cutting Fluid Oil on Turning Performance of Cylindrical Mild Steel. Journal of Applied Sciences and Environmental Management. 2026;30(4):1384-1388. doi:10.4314/jasem.v30i4.38
BibTeX
@article{Arum2026,
author = {Arum, A. I. and Sinebe, J. and Enyi, C. L. and Ukrakpor, F. and Ekpu, M. and Sada, S. O.},
title = {Effect of Paraffin Cutting Fluid Oil on Turning Performance of Cylindrical Mild Steel},
journal = {Journal of Applied Sciences and Environmental Management},
year = {2026},
volume = {30},
number = {4},
pages = {1384--1388},
doi = {10.4314/jasem.v30i4.38}
}
EUVIMED