Analysis of Characteristics of Half-Cut Solar Cells According to the NDC Process for High-Power Modules
Journal of Korean Institute of Electrical and Electronic Materials Engineers · 01.11.2024 · 37 (6) · 637-643
DOI: 10.4313/jkem.2024.37.6.9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Korean Institute of Electrical and Electronic Materials Engineers, erschienen am 01.11.2024. Verfasst von Guemhee Ham und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
One method to increase the output of solar modules is the application of the Half-cut technique, which requires a scribing process involving direct irradiation of infrared lasers on the solar cells. During this process, the laser melts the surface of the solar cells at high temperatures, enabling mechanical division, but this can lead to output loss due to thermal degradation caused by the laser. To minimize such losses, a low-temperature and low-loss division method has been devised. In this study, we compared the electrical characteristics and leakage currents affecting output degradation between the newly devised low temperature and low-loss cell division method and the conventional laser division method. Additionally, we conducted a 3-point flexural test to evaluate the mechanical properties of both methods.
Zitieren
APA
Ham, G., & Lee, J. (2024). Analysis of Characteristics of Half-Cut Solar Cells According to the NDC Process for High-Power Modules. Journal of Korean Institute of Electrical and Electronic Materials Engineers, 37(6), 637-643. https://doi.org/10.4313/jkem.2024.37.6.9
Vancouver
Ham G, Lee J. Analysis of Characteristics of Half-Cut Solar Cells According to the NDC Process for High-Power Modules. Journal of Korean Institute of Electrical and Electronic Materials Engineers. 2024;37(6):637-643. doi:10.4313/jkem.2024.37.6.9
BibTeX
@article{Ham2024,
author = {Ham, Guemhee and Lee, Jeahyeong},
title = {Analysis of Characteristics of Half-Cut Solar Cells According to the NDC Process for High-Power Modules},
journal = {Journal of Korean Institute of Electrical and Electronic Materials Engineers},
year = {2024},
volume = {37},
number = {6},
pages = {637--643},
doi = {10.4313/jkem.2024.37.6.9}
}
EUVIMED