EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Challenges and advantages of cut solar cells for shingling and half-cell modules

Jonas D. Huyeng, Elmar Lohmüller, Behnaz Shabanzadeh, Christian Reichel, Torsten Rößler, Julian Weber, Marc Hofmann, Daniel von Kutzleben, Najwa Abdel Latif, Achim Kraft, Holger Neuhaus, Florian Clement und 1 weitere

EPJ Photovoltaics · 2024 · 15 · 22

DOI: 10.1051/epjpv/2024019 ↗

Kurz gefasst

Fachartikel in der Zeitschrift EPJ Photovoltaics, online erschienen am 11.06.2024. Verfasst von Jonas D. Huyeng und 12 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Wirtschaft und Klimaschutz.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cutting silicon solar cells from their host wafer into smaller cells reduces the output current per cut cell and therefore allows for reduced ohmic losses in series interconnection at module level. This comes with a trade-off of unpassivated cutting edges, which result in power losses. This performance drop can be seen in fill factor FF and open-circuit voltage V OC losses on cut cell level. Based on experimental realization of different solar cell layouts on the same industrial blue wafers (solar cell precursors), a combined simulation method to predict the performance on module level is demonstrated. This method uses Gridmaster+ for cell simulation and SmartCalc. Module for module simulation. The accuracy of the simulations is demonstrated by comparing with experimental results both from host and cut cell level. In addition, significant influence of the current–voltage ( I – V ) measurement configuration is demonstrated, mainly affecting FF . Using flexible methods like GridTOUCH® for I – V testing gives fast results but can also lead to overestimation of the host cell performance, resulting in overestimated cell-to-module losses or unreasonable comparisons between hosts and cut cells. It is also demonstrated that application of the passivated edge technology (PET) yields I – V characteristics close to those of cells with ideal edges, i.e., without edge recombination. The implications on the module efficiency are also compared between modules built using cells with and without edge passivation, giving the highest efficiency for a shingled module with PET.

Förderung

  • Bundesministerium für Wirtschaft und Klimaschutz

Zitieren

APA

Huyeng, J. D., Lohmüller, E., Shabanzadeh, B., Reichel, C., Rößler, T., Weber, J., Hofmann, M., Kutzleben, D. V., Latif, N. A., Kraft, A., Neuhaus, H., Clement, F., & Preu, R. (2024). Challenges and advantages of cut solar cells for shingling and half-cell modules. EPJ Photovoltaics, 15, 22. https://doi.org/10.1051/epjpv/2024019

Vancouver

Huyeng JD, Lohmüller E, Shabanzadeh B, Reichel C, Rößler T, Weber J, et al. Challenges and advantages of cut solar cells for shingling and half-cell modules. EPJ Photovoltaics. 2024;15:22. doi:10.1051/epjpv/2024019

BibTeX
@article{Huyeng2024,
  author = {Huyeng, Jonas D. and Lohmüller, Elmar and Shabanzadeh, Behnaz and Reichel, Christian and Rößler, Torsten and Weber, Julian and Hofmann, Marc and Kutzleben, Daniel von and Latif, Najwa Abdel and Kraft, Achim and Neuhaus, Holger and Clement, Florian and Preu, Ralf},
  title = {Challenges and advantages of cut solar cells for shingling and half-cell modules},
  journal = {EPJ Photovoltaics},
  year = {2024},
  volume = {15},
  pages = {22},
  doi = {10.1051/epjpv/2024019}
}
Kostenlos starten →