EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Doping Optimization of 2.4 kV 4H-SiC Planar MOSFETs for Enhanced Electrical Performance

Taeyeong Yoon, Jeongmin Kim, Jun Lee, Songye Lim, Hyeondo Kang, Seung-hyun Park, Sang-mo Koo

Journal of Electrical and Electronic Materials · 01.11.2025 · 38 (6) · 672-676

DOI: 10.4313/jeem.2025.38.6.10 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electrical and Electronic Materials, erschienen am 01.11.2025. Verfasst von Taeyeong Yoon und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon carbide (SiC) power devices are attracting increasing attention for high-voltage and high-efficiency applications due to their superior material properties. However, achieving an optimal trade-off between specific on-resistance (Ron,sp) and breakdown voltage (BV) remains a key design challenge in planar MOSFET structures. In this study, twodimensional TCAD simulations were conducted to investigate the impact of varying the doping concentrations of the P-well (from 3 × 1017 to 6 × 1017 cm-3) and JFET regions (from 1 × 1016 to 7 × 1016 cm-3) on the electrical characteristics of 2.4 kVclass planar SiC MOSFETs. To maintain comparable BV conditions for 2.4 kV operation, two groups with P-well doping concentrations of 4.5 × 1017 cm-3 and 5.3 × 1017 cm-3 were analyzed and compared. When the P-well and JFET doping concentrations were 4.5 × 1017 cm-3 and 1.5 × 1016 cm-3, respectively, the simulated Ron,sp and BV were 1.41 mΩ·cm2 and 3,150 V. In contrast, with P-well and JFET doping concentrations of 5.3 × 1017 cm-3 and 5.0 × 1016 cm-3, the Ron,sp was reduced to 1.31 mΩ·cm2 while the BV slightly increased to 3,200 V. Based on these results, an optimized device structure was proposed, demonstrating its potential for integration into high-voltage SiC-based power systems. This study provides practical design insights and is expected to contribute to the advancement of wide bandgap semiconductor technologies for next-generation power electronics.

Zitieren

APA

Yoon, T., Kim, J., Lee, J., Lim, S., Kang, H., Park, S., & Koo, S. (2025). Doping Optimization of 2.4 kV 4H-SiC Planar MOSFETs for Enhanced Electrical Performance. Journal of Electrical and Electronic Materials, 38(6), 672-676. https://doi.org/10.4313/jeem.2025.38.6.10

Vancouver

Yoon T, Kim J, Lee J, Lim S, Kang H, Park S, et al. Doping Optimization of 2.4 kV 4H-SiC Planar MOSFETs for Enhanced Electrical Performance. Journal of Electrical and Electronic Materials. 2025;38(6):672-676. doi:10.4313/jeem.2025.38.6.10

BibTeX
@article{Yoon2025,
  author = {Yoon, Taeyeong and Kim, Jeongmin and Lee, Jun and Lim, Songye and Kang, Hyeondo and Park, Seung-hyun and Koo, Sang-mo},
  title = {Doping Optimization of 2.4 kV 4H-SiC Planar MOSFETs for Enhanced Electrical Performance},
  journal = {Journal of Electrical and Electronic Materials},
  year = {2025},
  volume = {38},
  number = {6},
  pages = {672--676},
  doi = {10.4313/jeem.2025.38.6.10}
}
Kostenlos starten →