EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrical Performance of 4H-SiC MOSFETs with Different Gate Oxide Processes

Wei Chen Yu, Chia Lung Hung, Wei Cheng Lin, Wei Ting Lin, Tejender Singh Rawat, Yi Kai Hsiao, Tian Li Wu, Hao Chung Kuo

Materials Science Forum · 20.05.2026 · 1192 · 15-20

DOI: 10.4028/p-48kf9g ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 20.05.2026. Verfasst von Wei Chen Yu und 7 weiteren Autor:innen. Die Arbeit nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work investigates the impact of different gate oxide fabrication schemes on the electrical characteristics of 4H-SiC planar MOSFETs. Three processes were implemented: (1) 50 nm thermal oxidation with NO annealing at 1350°C, (2) 50 nm ALD-grown oxide with NO annealing at 1250°C, and (3) a stacked 20 nm thermal/30 nm ALD oxide structure with NO annealing at 1250°C. Electrical characterization included I d V g , CV, and I g E ox measurements. Results show that Condition 1 exhibits the lowest leakage and best uniformity, and demonstrates strong oxide integrity without soft breakdown events. In contrast, Condition 2 and 3 show increased leakage, higher variability, and evidence of soft breakdown, suggesting greater interfacial weakness. However, a surprising trend was observed in the CV analysis: Condition 2’s flat band voltage (VFB​) is closest to the ideal 0V, indicating a lower fixed charge density than Condition 1 [1], which has the most negative VFB​ (≈ -2V). The hysteresis results further highlight differences, with Condition 3 showing the largest hysteresis window (ΔVth​=0.13V). These findings suggest that while the ALD process coupled with a lower-temperature NO anneal (Condition 2) can effectively reduce fixed charges, it does not fully eliminate interfacial defects responsible for increased leakage and soft breakdown. Our results underscore the complex trade-offs in different fabrication schemes, emphasizing that careful interface engineering beyond conventional NO annealing is required to ensure reliable performance in SiC MOSFETs.

Zitieren

APA

Yu, W. C., Hung, C. L., Lin, W. C., Lin, W. T., Rawat, T. S., Hsiao, Y. K., Wu, T. L., & Kuo, H. C. (2026). Electrical Performance of 4H-SiC MOSFETs with Different Gate Oxide Processes. Materials Science Forum, 1192, 15-20. https://doi.org/10.4028/p-48kf9g

Vancouver

Yu WC, Hung CL, Lin WC, Lin WT, Rawat TS, Hsiao YK, et al. Electrical Performance of 4H-SiC MOSFETs with Different Gate Oxide Processes. Materials Science Forum. 2026;1192:15-20. doi:10.4028/p-48kf9g

BibTeX
@article{Yu2026,
  author = {Yu, Wei Chen and Hung, Chia Lung and Lin, Wei Cheng and Lin, Wei Ting and Rawat, Tejender Singh and Hsiao, Yi Kai and Wu, Tian Li and Kuo, Hao Chung},
  title = {Electrical Performance of 4H-SiC MOSFETs with Different Gate Oxide Processes},
  journal = {Materials Science Forum},
  year = {2026},
  volume = {1192},
  pages = {15--20},
  doi = {10.4028/p-48kf9g}
}
Kostenlos starten →