Optimizing Fabrication Parameters for Sisal and Abaca Fiber Reinforced Bio-composites: A Taguchi and RSM Approach
International Journal of Vehicle Structures and Systems · 07.03.2026 · 18 (2)
DOI: 10.4273/ijvss.18.2.11 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Vehicle Structures and Systems, online erschienen am 07.03.2026. Verfasst von S. Balachandran und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Natural fibre composites made of woven sisal (SF) and abaca (AF) are fabricated in this study utilizing the vacuum-assisted resin infusion (VARI) technique. For this study, the optimal parameters of manufacturing were determined using Taguchi experimental design approach, with L27 orthogonal array matrix. To get the best response values, researchers employed Response Surface Methodology (RSM). Fiber type (AF, SF, AF-SF), water absorption test duration (8, 16, 24 hours) and NaOH treatment percentage (2, 4, 6 wt %) were the factors considered. According to the study's findings, a mix of A1B3C1 parameters and RSM optimization of manufacturing parameters resulted in a flexural strength of 94.865 MPa and an impact strength of 0.241 J/mm2.
Zitieren
APA
Balachandran, S., Kavita, K., Vetrivel, K., Arul, M., Babu, L. G., & Girimurugan, R. (2026). Optimizing Fabrication Parameters for Sisal and Abaca Fiber Reinforced Bio-composites: A Taguchi and RSM Approach. International Journal of Vehicle Structures and Systems, 18(2). https://doi.org/10.4273/ijvss.18.2.11
Vancouver
Balachandran S, Kavita K, Vetrivel K, Arul M, Babu LG, Girimurugan R. Optimizing Fabrication Parameters for Sisal and Abaca Fiber Reinforced Bio-composites: A Taguchi and RSM Approach. International Journal of Vehicle Structures and Systems. 2026;18(2). doi:10.4273/ijvss.18.2.11
BibTeX
@article{Balachandran2026,
author = {Balachandran, S. and Kavita, K. and Vetrivel, K.P. and Arul, M. and Babu, L. Ganesh and Girimurugan, R.},
title = {Optimizing Fabrication Parameters for Sisal and Abaca Fiber Reinforced Bio-composites: A Taguchi and RSM Approach},
journal = {International Journal of Vehicle Structures and Systems},
year = {2026},
volume = {18},
number = {2},
doi = {10.4273/ijvss.18.2.11}
}
EUVIMED