EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sisal-Fiber-Reinforced Polypropylene Flame-Retardant Composites: Preparation and Properties

Zhenhua Wang, Weili Feng, Jiachen Ban, Zheng Yang iD, Xiaomin Fang, Tao Ding, Baoying Liu iD, Junwei Zhao

Polymers · 10.02.2023 · 15 (4) · 893

DOI: 10.3390/polym15040893 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.02.2023. Verfasst von Zhenhua Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry and Chemical Engineering, Henan University, Kaifeng 475004, China. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China, Key scientific research project of colleges and universities in Henan province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Natural-fiber-reinforced polypropylene (PP) composites with a series of advantages including light weight, chemical durability, renewable resources, low in cost, etc., are being widely used in many fields such as the automotive industry, packaging, and construction. However, the flammability of plant fiber and the PP matrix restricts the application range, security, and use of these composites. Therefore, it is of great significance to study the flame retardants of such composites. In this paper, sisal-fiber-reinforced polypropylene (PP/SF) flame-retardant composites were prepared using the two-step melt blending method. The flame retardant used was an intumescent flame retardant (IFR) composed of silane-coated ammonium polyphosphate (Si-APP) and pentaerythritol (PER). The influence of different blending processes on the flammability and mechanical properties of the composites was analyzed. The findings suggested that PP/SF flame-retardant composites prepared via different blending processes showed different flame-retardant properties. The (PP/SF)/IFR composite prepared by PP/SF secondary blending with IFR showed excellent flame-retardant performance, with a limited oxygen index of about 28.3% and passing the UL-94 V-0 rating (3.2 mm) in the vertical combustion test. Compared with the (PP/IFR) /SF composite prepared by a matrix primarily blended with IFR and then secondly blended with SF, the peak heat release rate (pk HRR) and total heat release (THR) of the (PP/SF)/IFR composite decreased by 11.3% and 13.7%, respectively. In contrast, the tensile strength of the (PP/SF)/IFR system was 5.3% lower than that of the (PP/IFR)/SF system; however, the overall mechanical (tensile, flexural, and notched impact) properties of the composites prepared using three different mixing processes were similar.

Schlagwörter

Stichwörter der Autor:innen

flame retardantmechanical propertiespolypropylenepreparationsisal fiber

Autor:innen und Institutionen

  • College of Chemistry and Chemical Engineering, Henan University, Kaifeng 475004, China.
  • Institute of Science and Technology, Minsheng College, Henan University, Kaifeng 475004, China.

ORCID-Profile: Zheng Yang, Baoying Liu

Förderung

  • Natural Science Foundation of China
  • Key scientific research project of colleges and universities in Henan province

Zitieren

APA

Wang, Z., Feng, W., Ban, J., Yang, Z., Fang, X., Ding, T., Liu, B., & Zhao, J. (2023). Sisal-Fiber-Reinforced Polypropylene Flame-Retardant Composites: Preparation and Properties. Polymers, 15(4), 893. https://doi.org/10.3390/polym15040893

Vancouver

Wang Z, Feng W, Ban J, Yang Z, Fang X, Ding T, et al. Sisal-Fiber-Reinforced Polypropylene Flame-Retardant Composites: Preparation and Properties. Polymers. 2023;15(4):893. doi:10.3390/polym15040893

BibTeX
@article{Wang2023,
  author = {Wang, Zhenhua and Feng, Weili and Ban, Jiachen and Yang, Zheng and Fang, Xiaomin and Ding, Tao and Liu, Baoying and Zhao, Junwei},
  title = {Sisal-Fiber-Reinforced Polypropylene Flame-Retardant Composites: Preparation and Properties},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {4},
  pages = {893},
  doi = {10.3390/polym15040893}
}
Kostenlos starten →