Effect of Hydrogen Injection Timing in a Compression Ignition Engine Operating in Hydrogen Diesel Dual Fuel Mode
SAE International Journal of Advances and Current Practices in Mobility · 03.11.2025 · 08 (2) · 743-755
DOI: 10.4271/2025-32-0051 ↗Kurz gefasst
Fachartikel in der Zeitschrift SAE International Journal of Advances and Current Practices in Mobility, online erschienen am 03.11.2025. Verfasst von Salvatore Rossetti und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Stringent European carbon dioxide (CO2) emission regulations have stimulated the development of alternative technologies such as Dual Fuel (DF), which involves partially replacing fossil fuel with a low-carbon alternative. Hydrogen represents an ideal candidate for DF due to its properties, including the absence of carbon, high flame propagation speed, and high diffusivity. This study analyzes the combustion and performance of a 1.0L, naturally aspirated, three-cylinder in-line compression ignition off-road engine with a 17.5:1 compression ratio, originally equipped with a conventional diesel system and modified for diesel-hydrogen dual fuel operation. Three Port Fuel Injectors (PFI) are installed in the intake manifold for hydrogen injection. Additionally, they are strategically positioned to minimize the volume between the intake valve and injector tip. Tests were conducted at a fixed engine speed of 2000 rpm, varying the engine load from 30% to 85% of maximum torque. The diesel contribution was maintained at 10%, while hydrogen provided the remaining energy, achieving a substitution ratio up to 72%. The analysis showed that hydrogen without diesel doesn't burn efficiently, and the combustion of the air-hydrogen mixture is influenced by diesel injection and excess air in the engine. Subsequently, with the load fixed at 70%, the effect of hydrogen start of injection (SOI) on the engine's air intake flow was studied. The injection window was shifted by 112° crank angle step, avoiding injection near the intake valve closing. The results showed that injections too close to the compression phase, (end of injection equal to 163° crank angle before top dead center), can cause irregular combustion problems.
Zitieren
APA
Rossetti, S., & Mancaruso, E. (2025). Effect of Hydrogen Injection Timing in a Compression Ignition Engine Operating in Hydrogen Diesel Dual Fuel Mode. SAE International Journal of Advances and Current Practices in Mobility, 08(2), 743-755. https://doi.org/10.4271/2025-32-0051
Vancouver
Rossetti S, Mancaruso E. Effect of Hydrogen Injection Timing in a Compression Ignition Engine Operating in Hydrogen Diesel Dual Fuel Mode. SAE International Journal of Advances and Current Practices in Mobility. 2025;08(2):743-755. doi:10.4271/2025-32-0051
BibTeX
@article{Rossetti2025,
author = {Rossetti, Salvatore and Mancaruso, Ezio},
title = {Effect of Hydrogen Injection Timing in a Compression Ignition Engine Operating in Hydrogen Diesel Dual Fuel Mode},
journal = {SAE International Journal of Advances and Current Practices in Mobility},
year = {2025},
volume = {08},
number = {2},
pages = {743--755},
doi = {10.4271/2025-32-0051}
}
EUVIMED