EUVIMEDOpdag EUVIMED
Open access

3D printed PLA-based scaffolds

Tiziano Serra, Miguel A Mateos-Timoneda, Josep A Planell, Melba Navarro

Organogenesis · 2013-10 · 9 (4) · 239-244

DOI: 10.4161/org.26048 ↗

At a glance

Journal article in Organogenesis, published online on 2013-08-19. Written by Tiziano Serra and 3 co-authors. Institution: Institute for Bioengineering of Catalonia (IBEC); Barcelona, Spain; CIBER de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN); Barcelona, Spai…. Cited 186 times so far (Crossref); 29 references. The full text is freely available in PubMed Central.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Rapid prototyping (RP), also known as additive manufacturing (AM), has been well received and adopted in the biomedical field. The capacity of this family of techniques to fabricate customized 3D structures with complex geometries and excellent reproducibility has revolutionized implantology and regenerative medicine. In particular, nozzle-based systems allow the fabrication of high-resolution polylactic acid (PLA) structures that are of interest in regenerative medicine. These 3D structures find interesting applications in the regenerative medicine field where promising applications including biodegradable templates for tissue regeneration purposes, 3D in vitro platforms for studying cell response to different scaffolds conditions and for drug screening are considered among others. Scaffolds functionality depends not only on the fabrication technique, but also on the material used to build the 3D structure, the geometry and inner architecture of the structure, and the final surface properties. All being crucial parameters affecting scaffolds success. This Commentary emphasizes the importance of these parameters in scaffolds' fabrication and also draws the attention toward the versatility of these PLA scaffolds as a potential tool in regenerative medicine and other medical fields.

Subjects

MeSH terms (MEDLINE)

AnimalsLactic AcidMesenchymal Stem CellsPolyestersPolymersPrintingRatsRegenerative MedicineSurface PropertiesTissue Scaffolds

Author keywords

3D in vitro culture systembiodegradablecalcium phosphate glasscomposite materialdrug screeningpolylactic acid (PLA)rapid prototypingregenerative medicinescaffoldstissue engineering

Substances

PolyestersPolymersLactic Acidpoly(lactide)

Authors and institutions

  • Institute for Bioengineering of Catalonia (IBEC); Barcelona, Spain; CIBER de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN); Barcelona, Spain.
  • Institute for Bioengineering of Catalonia (IBEC); Barcelona, Spain; CIBER de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN); Barcelona, Spain; Technical University of Catalonia (UPC); Barcelona, Spain.

Cite

APA

Serra, T., Mateos-Timoneda, M. A., Planell, J. A., & Navarro, M. (2013). 3D printed PLA-based scaffolds. Organogenesis, 9(4), 239-244. https://doi.org/10.4161/org.26048

Vancouver

Serra T, Mateos-Timoneda MA, Planell JA, Navarro M. 3D printed PLA-based scaffolds. Organogenesis. 2013;9(4):239-244. doi:10.4161/org.26048

BibTeX
@article{Serra2013,
  author = {Serra, Tiziano and Mateos-Timoneda, Miguel A and Planell, Josep A and Navarro, Melba},
  title = {3D printed PLA-based scaffolds},
  journal = {Organogenesis},
  year = {2013},
  volume = {9},
  number = {4},
  pages = {239--244},
  doi = {10.4161/org.26048}
}
Start for free →