EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Role of Oxides in the Tensile Properties of Pure Copper Processed by Laser Powder Bed Fusion

Haeum Park, Ki Jong Kim, Yeon Woo Kim, Hahun Lee, Kichul Park, Yerim Kim, Kee-Ahn Lee, Seok Su Sohn, Jeong Min Park

Journal of Powder Materials · 31.10.2026 · 33 (5) · 372-378

DOI: 10.4150/jpm.2026.00248 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 31.10.2026. Verfasst von Haeum Park und 8 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Korea Institute of Materials Science, National Research Foundation of Korea, Ministry of Trade, Industry and Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Oxide particles can affect the tensile properties of pure Cu processed by laser powder bed fusion (LPBF) through their interactions with dislocations. This study compared the microstructure and tensile behavior of samples produced from virgin and oxidized pure Cu powders under identical LPBF conditions. The two samples had comparable relative densities above 98.7% and similar grain sizes. Yield and ultimate tensile strengths were nevertheless higher in the oxidized sample, whereas uniform and total elongations were lower. Backscattered-electron imaging and image analysis indicated that oxide particles occupied a higher apparent area fraction in the examined fields of the oxidized sample; electron backscatter diffraction analysis also showed higher kernel average misorientation. Together, these observations suggest two possible roles for oxide particles: acting as dispersed obstacles to dislocation motion and promoting dislocation retention during LPBF, consistent with the higher kernel average misorientation. The strength increase may therefore reflect both particle strengthening and a greater contribution from dislocation strengthening.

Förderung

  • Korea Institute of Materials Science
  • National Research Foundation of Korea
  • Ministry of Trade, Industry and Energy

Zitieren

APA

Park, H., Kim, K. J., Kim, Y. W., Lee, H., Park, K., Kim, Y., Lee, K., Sohn, S. S., & Park, J. M. (2026). Role of Oxides in the Tensile Properties of Pure Copper Processed by Laser Powder Bed Fusion. Journal of Powder Materials, 33(5), 372-378. https://doi.org/10.4150/jpm.2026.00248

Vancouver

Park H, Kim KJ, Kim YW, Lee H, Park K, Kim Y, et al. Role of Oxides in the Tensile Properties of Pure Copper Processed by Laser Powder Bed Fusion. Journal of Powder Materials. 2026;33(5):372-378. doi:10.4150/jpm.2026.00248

BibTeX
@article{Park2026,
  author = {Park, Haeum and Kim, Ki Jong and Kim, Yeon Woo and Lee, Hahun and Park, Kichul and Kim, Yerim and Lee, Kee-Ahn and Sohn, Seok Su and Park, Jeong Min},
  title = {Role of Oxides in the Tensile Properties of Pure Copper Processed by Laser Powder Bed Fusion},
  journal = {Journal of Powder Materials},
  year = {2026},
  volume = {33},
  number = {5},
  pages = {372--378},
  doi = {10.4150/jpm.2026.00248}
}
Kostenlos starten →