Laser powder bed fusion of pure copper using ring-shaped beam profiles
Journal of Laser Applications · 01.11.2024 · 36 (4)
DOI: 10.2351/7.0001562 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 23.09.2024. Verfasst von Alexander Bauch und 2 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State innovation funding of the Free and Hanseatic City of Hamburg.
Abstract (Originalsprache)
Additive manufacturing of copper using laser powder bed fusion (PBF-LB/M) enables the production of highly complex components. However, processing of copper by means of near-infrared laser radiation is challenging due to its absorptivity of only 5%–20%. Using a keyhole welding process with a Gaussian intensity distribution increases the absorptivity up to 53% due to multireflection. This enables the production of components with a density larger than 99.5% and electrical conductivity larger than 90% of the International Annealed Copper Standard (IACS), but this type of welding leads to keyhole porosity due to keyhole instabilities. One way of counteracting is the use of a heat conduction welding process. However, due to the Gaussian intensity distribution, it is not possible to supply sufficient energy to eliminate lack-of-fusion porosity and concurrently avoid the formation of a keyhole. Ring-shaped beam profiles have proven their advantages in stabilizing the PBF-LB/M process with a tendency toward higher laser power, but pure copper has not yet been processed in this way. Therefore, this study investigates the potential of three ring-shaped beam profiles to produce specimens with a density of more than 99.5% and their respective electrical conductivity using a laser power of up to 1300 W. In order to understand the underlying welding process, the weld geometry of single-tracks is analyzed. Specimens with a density of up to 99.77% and an electrical conductivity of up to 101.62% IACS are produced, whereby the material properties and welding regime depend on the selected ring-shaped beam profile.
Förderung
- State innovation funding of the Free and Hanseatic City of Hamburg
Zitieren
APA
Bauch, A., Kohlwes, P., & Kelbassa, I. (2024). Laser powder bed fusion of pure copper using ring-shaped beam profiles. Journal of Laser Applications, 36(4). https://doi.org/10.2351/7.0001562
Vancouver
Bauch A, Kohlwes P, Kelbassa I. Laser powder bed fusion of pure copper using ring-shaped beam profiles. Journal of Laser Applications. 2024;36(4). doi:10.2351/7.0001562
BibTeX
@article{Bauch2024,
author = {Bauch, Alexander and Kohlwes, Philipp and Kelbassa, Ingomar},
title = {Laser powder bed fusion of pure copper using ring-shaped beam profiles},
journal = {Journal of Laser Applications},
year = {2024},
volume = {36},
number = {4},
doi = {10.2351/7.0001562}
}
EUVIMED