Phase Formation Behavior and Piezocatalytic Properties of Sodium Bismuth Titanate-Based Perovskite Fine Powders Prepared by Ultrasonic Spray Pyrolysis
Journal of Powder Materials · 30.06.2026 · 33 (3) · 239-248
DOI: 10.4150/jpm.2026.00129 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 30.06.2026. Verfasst von Hee Yeon Jeon und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Technology Innovation Program, Ministry of Trade, Industry and Resources.
Abstract (Originalsprache)
Sodium bismuth titanate (Na0.5Bi0.5TiO3, NBT) is a representative lead-free piezoelectric ceramic with ferroelectric and piezoelectric properties, promising candidate for piezocatalytic applications driven by mechanical vibration. In this study, NBT-based perovskite fine powders were prepared by ultrasonic spray pyrolysis (USP), a continuous aerosol process based on droplet-level reaction control. The effect of pyrolysis temperature, varied from 700oC to 950oC, on phase formation and particle morphology was investigated. At lower temperatures, Bi-based secondary phases predominated, whereas the perovskite phase gradually developed with increasing temperature. The powder synthesized at 950oC exhibited a well-defined perovskite crystal structure with improved crystallinity. FE-SEM analysis showed that the powders consisted of spherical particles with an average size of approximately 750 nm, without severe interparticle agglomeration. EDS analysis confirmed a relatively homogeneous distribution of Na, Bi, Ti, and O, with Na-rich composition, consistent with Na-rich precursor condition. Piezoresponse force microscope (PFM) measurements verified the ferroelectric and piezoelectric responses of the powder synthesized at 950oC. In Rhodamine B degradation tests under probe-type ultrasonication, adding the NBT-based powder increased the reaction rate constant from 7.96×10-3 to 1.16×10-2 min-1. These results suggest that USP is a feasible continuous process for preparing NBT-based perovskite fine powders for lead-free piezocatalytic applications.
Förderung
- Technology Innovation Program
- Ministry of Trade, Industry and Resources
Zitieren
APA
Jeon, H. Y., Park, J. M., You, J. E., & Lee, Y. (2026). Phase Formation Behavior and Piezocatalytic Properties of Sodium Bismuth Titanate-Based Perovskite Fine Powders Prepared by Ultrasonic Spray Pyrolysis. Journal of Powder Materials, 33(3), 239-248. https://doi.org/10.4150/jpm.2026.00129
Vancouver
Jeon HY, Park JM, You JE, Lee Y. Phase Formation Behavior and Piezocatalytic Properties of Sodium Bismuth Titanate-Based Perovskite Fine Powders Prepared by Ultrasonic Spray Pyrolysis. Journal of Powder Materials. 2026;33(3):239-248. doi:10.4150/jpm.2026.00129
BibTeX
@article{Jeon2026,
author = {Jeon, Hee Yeon and Park, Jae Min and You, Ju Eun and Lee, Young-In},
title = {Phase Formation Behavior and Piezocatalytic Properties of Sodium Bismuth Titanate-Based Perovskite Fine Powders Prepared by Ultrasonic Spray Pyrolysis},
journal = {Journal of Powder Materials},
year = {2026},
volume = {33},
number = {3},
pages = {239--248},
doi = {10.4150/jpm.2026.00129}
}
EUVIMED