EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Processing and Characterization of Air-Sprayed Bismuth Titanate Ultrasonic Transducers

Maryam Ghodousi iD, Bernhard Tittmann iD, Cliff J Lissenden iD

Sensors · 10.03.2026 · 26 (6) · 1747

DOI: 10.3390/s26061747 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.03.2026. Verfasst von Maryam Ghodousi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy, DOE-funded laboratory.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Transducers for ultrasonic nondestructive evaluation of materials in harsh environments are needed to manage safe operations in a number of industrial applications including power generation, propulsion, and material and chemical processing. Bismuth titanate has a reasonably high Curie temperature and transduces electrical energy into elastic waves and vice versa. Herein, a slurry containing bismuth titanate powder is air-sprayed onto stainless steel substrates, functionalized, and characterized in terms of coating thickness, center frequency and bandwidth, and signal-to-noise ratio. Coatings 40– 70 μm thick had a center frequency of approximately 7 MHz and a broad frequency response range of 3–20 MHz. Transducers were thermally aged at 375 °C for seven days to assess their temperature tolerance. Post-aging analysis revealed a resonance frequency increase, thickness reduction, and microstructural changes, accompanied by a decrease in signal amplitude. Despite these changes, the aged transducers remained operational with good signal-to-noise ratio. Thermal cycling experiments showed that the response of pristine transducers is changed by cycling to 250 °C, while thermally aged transducers exhibited stable ultrasonic performance. Additional experiments on transducers pre-conditioned at 400 °C demonstrated improved thermal resilience after thermal aging at 350 °C. These field deployable air-sprayed BIT transducers are promising candidates for high-temperature NDE applications.

Schlagwörter

Stichwörter der Autor:innen

air-sprayed transducerbismuth titanatepiezoelectric transducer characterizationthermal agingultrasonic transducer

Autor:innen und Institutionen

  • Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA.

ORCID-Profile: Maryam Ghodousi, Bernhard Tittmann, Cliff J Lissenden

Förderung

  • U.S. Department of Energy
  • DOE-funded laboratory

Zitieren

APA

Ghodousi, M., Tittmann, B., & Lissenden, C. J. (2026). Processing and Characterization of Air-Sprayed Bismuth Titanate Ultrasonic Transducers. Sensors, 26(6), 1747. https://doi.org/10.3390/s26061747

Vancouver

Ghodousi M, Tittmann B, Lissenden CJ. Processing and Characterization of Air-Sprayed Bismuth Titanate Ultrasonic Transducers. Sensors. 2026;26(6):1747. doi:10.3390/s26061747

BibTeX
@article{Ghodousi2026,
  author = {Ghodousi, Maryam and Tittmann, Bernhard and Lissenden, Cliff J},
  title = {Processing and Characterization of Air-Sprayed Bismuth Titanate Ultrasonic Transducers},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {6},
  pages = {1747},
  doi = {10.3390/s26061747}
}
Kostenlos starten →