Ultrasonic Nanocrystal Surface Modification of 3D Interconnected Heterostructured Complex Concentrated Alloys Produced by Liquid Metal Dealloying: Microstructural Evolution and Wear Behavior
Journal of Powder Materials · 30.04.2026 · 33 (2) · 91-103
DOI: 10.4150/jpm.2026.00045 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 30.04.2026. Verfasst von Jumi Choi und 7 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Science and ICT.
Abstract (Originalsprache)
This study investigates the effects of ultrasonic nanocrystal surface modification (UNSM) on the microstructural evolution and tribological performance of a three-dimensional interconnected heterostructured compositionally complex alloy fabricated by liquid metal dealloying (LMD). The as-LMD microstructure comprises an interconnected Cu-rich phase and a CoCrFe-rich ligament phase. Electron backscatter diffraction reveals pronounced severe plastic deformation near the surface after UNSM, characterized by subgrain formation and increased intragranular misorientation. The kernel average misorientation distribution reveals a pronounced depth-dependent deformation gradient, with dislocations preferentially accumulating at the interphase boundaries. Vickers hardness increases from approximately 100–120 HV in the as-LMD condition to greater than 270 HV at the surface after UNSM, and the hardening effect remains detectable to a depth of approximately 500 μm. Compressive residual stresses are concentrated within the surface-adjacent ~50 μm. The solid ligament phase exhibits higher compressive residual stress than the Cu-rich phase, reflecting phase-dependent deformation accommodation and stress partitioning. Reciprocating wear tests show a narrower wear track, a markedly reduced wear depth, and a lower and more stable friction coefficient after UNSM. Microscopy shows oxide-layer cracking and delamination in the as-LMD condition, whereas the UNSM-treated surface exhibits minor abrasive wear of the tribo-film without delamination.
Förderung
- National Research Foundation of Korea
- Ministry of Science and ICT
Zitieren
APA
Choi, J., Kim, Y., Choi, M., Lee, J. H., Lee, D. J., Amanov, A., Joo, S., & Kim, H. S. (2026). Ultrasonic Nanocrystal Surface Modification of 3D Interconnected Heterostructured Complex Concentrated Alloys Produced by Liquid Metal Dealloying: Microstructural Evolution and Wear Behavior. Journal of Powder Materials, 33(2), 91-103. https://doi.org/10.4150/jpm.2026.00045
Vancouver
Choi J, Kim Y, Choi M, Lee JH, Lee DJ, Amanov A, et al. Ultrasonic Nanocrystal Surface Modification of 3D Interconnected Heterostructured Complex Concentrated Alloys Produced by Liquid Metal Dealloying: Microstructural Evolution and Wear Behavior. Journal of Powder Materials. 2026;33(2):91-103. doi:10.4150/jpm.2026.00045
BibTeX
@article{Choi2026,
author = {Choi, Jumi and Kim, Yeji and Choi, Munsu and Lee, Jae Hyuk and Lee, Dong Jun and Amanov, Auezhan and Joo, Soo-Hyun and Kim, Hyoung Seop},
title = {Ultrasonic Nanocrystal Surface Modification of 3D Interconnected Heterostructured Complex Concentrated Alloys Produced by Liquid Metal Dealloying: Microstructural Evolution and Wear Behavior},
journal = {Journal of Powder Materials},
year = {2026},
volume = {33},
number = {2},
pages = {91--103},
doi = {10.4150/jpm.2026.00045}
}
EUVIMED