EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study on Surface Hardening and Wear Resistance of AISI 52100 Steel by Ultrasonic Nanocrystal Surface Modification and Electrolytic Plasma Surface Modification Technologies

Nurtoleu Magazov iD, Zarina Satbaeva, Bauyrzhan Rakhadilov, Auezhan Amanov iD

Materials · 23.10.2023 · 16 (20) · 6824

DOI: 10.3390/ma16206824 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.10.2023. Verfasst von Nurtoleu Magazov und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Daulet Serikbayev East Kazakhstan Technical University, Ust-Kamenogorsk 070010, Kazakhstan. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan, Ministry of Trade, Industry and Energy, Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a surface hardening of AISI 52100 bearing steel was performed by ultrasonic nanocrystal surface modification (UNSM), and electrolytic-plasma thermo-cyclic surface modification (EPSM), and their effects on the wear resistance were investigated. To evaluate the impact of these treatments on the wear resistance, the friction tests under dry conditions were conducted using a ball-on-disk tribometer in accordance with ASTM G99. The microstructure of the samples before and after treatment was characterized by scanning electron microscopy. The micro-hardness with respect to the depth from the top surface was measured using a Vickers micro-hardness tester. Microstructural observations showed that EPSM treatment led to the formation of residual austenite in the surface layer, while UNSM treatment led to the formation of a surface severe plastic deformation layer on the surface of the samples. The increase in the micro-hardness of the treated layer was confirmed after UNSM at room temperature and after EPSM at different cycles. The highest increase in wear resistance was observed for the specimen treated by UNSM treatment at 700 °C and five cycles of EPSM treatment. In addition, the wear volume, which has correlation with the friction coefficient and hardness, was determined.

Schlagwörter

Stichwörter der Autor:innen

AISI 52100 steelelectrolytic-plasma surface modificationultrasonic nanocrystal surface modificationwear resistance

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Daulet Serikbayev East Kazakhstan Technical University, Ust-Kamenogorsk 070010, Kazakhstan.
  • Surface Engineering and Tribology Research Center, Sarsen Amanzholov East Kazakhstan University, Ust-Kamenogorsk 070002, Kazakhstan.
  • PlasmaScience LLP, Ust-Kamenogorsk 070010, Kazakhstan.
  • Department of Mechanical Engineering, Sun Moon University, Asan 31460, Republic of Korea.
  • Faculty of Engineering and Natural Sciences, Tampere University, 33720 Tampere, Finland.

ORCID-Profile: Nurtoleu Magazov, Auezhan Amanov

Förderung

  • the Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan
  • Ministry of Trade, Industry and Energy
  • Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan

Zitieren

APA

Magazov, N., Satbaeva, Z., Rakhadilov, B., & Amanov, A. (2023). A Study on Surface Hardening and Wear Resistance of AISI 52100 Steel by Ultrasonic Nanocrystal Surface Modification and Electrolytic Plasma Surface Modification Technologies. Materials, 16(20), 6824. https://doi.org/10.3390/ma16206824

Vancouver

Magazov N, Satbaeva Z, Rakhadilov B, Amanov A. A Study on Surface Hardening and Wear Resistance of AISI 52100 Steel by Ultrasonic Nanocrystal Surface Modification and Electrolytic Plasma Surface Modification Technologies. Materials. 2023;16(20):6824. doi:10.3390/ma16206824

BibTeX
@article{Magazov2023,
  author = {Magazov, Nurtoleu and Satbaeva, Zarina and Rakhadilov, Bauyrzhan and Amanov, Auezhan},
  title = {A Study on Surface Hardening and Wear Resistance of AISI 52100 Steel by Ultrasonic Nanocrystal Surface Modification and Electrolytic Plasma Surface Modification Technologies},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {20},
  pages = {6824},
  doi = {10.3390/ma16206824}
}
Kostenlos starten →