EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effect of Powder Preparation Method on the Microstructural Characteristics of Sintered W-7Ni-3Cu Heavy Alloy

Youngmin Kim, Ji Young Kim, Minju Son, Wonyong Kwon, Eui Seon Lee, Sung-Tag Oh

Journal of Powder Materials · 30.04.2026 · 33 (2) · 113-118

DOI: 10.4150/jpm.2026.00038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 30.04.2026. Verfasst von Youngmin Kim und 5 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of powder characteristics and sintering temperature on the properties of W-7Ni-3Cu is investigated. The heavy alloy powders were prepared by ball milling and hydrogen reduction of elemental metal or metal oxide powders. Microstructural analysis revealed that the powder mixtures reduced by hydrogen at 800oC consist of a trace amount of Ni4W phase along with the metal W phase and Ni-Cu solid solution. Additionally, compared to metal powder, the powder mixture using oxide as raw material exhibited a relatively fine particle size. The W-7Ni-3Cu alloys sintered using oxide powders had relative density of over 99%, whereas the specimens using metal powders as a raw material showed relatively low values of 87.8~98.2%. The Vickers hardness of the sintered specimens using oxide powder was 3.34–3.92 GPa, which was higher than that of 2.39–3.22 GPa measured when using metal powders. The observed results can be attributed to the relatively high density and the reduced grain size.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Kim, Y., Kim, J. Y., Son, M., Kwon, W., Lee, E. S., & Oh, S. (2026). Effect of Powder Preparation Method on the Microstructural Characteristics of Sintered W-7Ni-3Cu Heavy Alloy. Journal of Powder Materials, 33(2), 113-118. https://doi.org/10.4150/jpm.2026.00038

Vancouver

Kim Y, Kim JY, Son M, Kwon W, Lee ES, Oh S. Effect of Powder Preparation Method on the Microstructural Characteristics of Sintered W-7Ni-3Cu Heavy Alloy. Journal of Powder Materials. 2026;33(2):113-118. doi:10.4150/jpm.2026.00038

BibTeX
@article{Kim2026,
  author = {Kim, Youngmin and Kim, Ji Young and Son, Minju and Kwon, Wonyong and Lee, Eui Seon and Oh, Sung-Tag},
  title = {Effect of Powder Preparation Method on the Microstructural Characteristics of Sintered W-7Ni-3Cu Heavy Alloy},
  journal = {Journal of Powder Materials},
  year = {2026},
  volume = {33},
  number = {2},
  pages = {113--118},
  doi = {10.4150/jpm.2026.00038}
}
Kostenlos starten →