EUVIMEDEUVIMED entdecken
Crossref

Preparation and characterisation of W–7Ni–3Cu alloy powder by hydrogen reduction of metal oxides

Youn Ji Heo, Eui Seon Lee, Jongmin Byun, Sung-Tag Oh

Powder Metallurgy · 2025-08 · 68 (4) · 363-368

DOI: 10.1177/00325899251347445 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powder Metallurgy, online erschienen am 03.06.2025. Verfasst von Youn Ji Heo und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 23 Literaturangaben. Gefördert von: National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructural characteristics and hydrogen reduction behaviour of W–7Ni–3Cu heavy alloy powders synthesised from WO 3 –NiO–CuO powder mixtures have been investigated. The fine and homogeneous oxide powder mixture is prepared by ball milling using stearic acid as a process control agent. The reduction behaviour of oxide powders is interpreted by thermogravimetric analysis in an N 2 –10% H 2 atmosphere. After milling for 5 h and hydrogen reduction at 800 °C, the oxide powders were completely converted to W, NiCu, and Ni 4 W phases without residual oxides and showed an average particle size of about 200 nm. The reduction kinetics is evaluated by the amount of peak shift in the thermogravimetric curves depending on the heating rates. The apparent activation energies for the reduction of CuO, NiO and WO 3 , estimated by the slope of the Kissinger plot, are measured as 96.9 kJ/mol, 122.0 kJ/mol and 114.6–124.3 kJ/mol, respectively. The measured activation energy is considered meaningful for quantitatively analysing the reduction kinetics in the non-isothermal reduction process of oxide composite powders.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Heo, Y. J., Lee, E. S., Byun, J., & Oh, S. (2025). Preparation and characterisation of W–7Ni–3Cu alloy powder by hydrogen reduction of metal oxides. Powder Metallurgy, 68(4), 363-368. https://doi.org/10.1177/00325899251347445

Vancouver

Heo YJ, Lee ES, Byun J, Oh S. Preparation and characterisation of W–7Ni–3Cu alloy powder by hydrogen reduction of metal oxides. Powder Metallurgy. 2025;68(4):363-368. doi:10.1177/00325899251347445

BibTeX
@article{Heo2025,
  author = {Heo, Youn Ji and Lee, Eui Seon and Byun, Jongmin and Oh, Sung-Tag},
  title = {Preparation and characterisation of W–7Ni–3Cu alloy powder by hydrogen reduction of metal oxides},
  journal = {Powder Metallurgy},
  year = {2025},
  volume = {68},
  number = {4},
  pages = {363--368},
  doi = {10.1177/00325899251347445}
}
Kostenlos starten →