The Optimization of L-PBF Process for Economical & High Performance Using SiO2 Nanoparticle-Coated Non-Spherical Ti Powder
Journal of Powder Materials · 28.02.2026 · 33 (1) · 22-36
DOI: 10.4150/jpm.2026.00024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 28.02.2026. Verfasst von Taehu Kang und 6 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea, Korea Institute of Energy Technology Evaluation and Planning.
Abstract (Originalsprache)
In laser powder bed fusion (L-PBF), a metal powder–based additive manufacturing process, pure titanium powders rely on expensive gas-atomized spherical powders, which poses a significant limitation of material cost. In contrast, non-spherical titanium powders are more cost-effective but their application in L-PBF is restricted their use due to poor flow property and high oxygen content. In this study, a powder mixing strategy with spherical titanium and hydrophobic SiO2 nanoparticle is proposed to improve the flowability and process stability of non-spherical Ti powders. After evaluating flow properties at various mixing ratios, a spherical-to-non-spherical Ti ratio of 4:6 was selected, with SiO2 nanoparticles added during mixing. The uniform distribution of oxide nanoparticles on the powder surfaces was confirmed by SEM and EDS. A maximum relative density of 99.7% was shown by specimens made with L-PBF under various processing parameters. The specimens obtained a tensile strength of 762.6 ± 3.8 MPa and an elongation of 22.1 ± 0.7% at a volumetric energy density of 71.4 J/mm³. This study demonstrates the application of low-cost non-spherical Ti powders in L-PBF is feasible and presents an effective way to simultaneously increase process stability and economic efficiency in titanium additive manufacturing.
Förderung
- National Research Foundation of Korea
- Korea Institute of Energy Technology Evaluation and Planning
Zitieren
APA
Kang, T., Gim, U., Kim, S., Lee, J., Jeong, S., Han, J., & Lee, B. (2026). The Optimization of L-PBF Process for Economical & High Performance Using SiO2 Nanoparticle-Coated Non-Spherical Ti Powder. Journal of Powder Materials, 33(1), 22-36. https://doi.org/10.4150/jpm.2026.00024
Vancouver
Kang T, Gim U, Kim S, Lee J, Jeong S, Han J, et al. The Optimization of L-PBF Process for Economical & High Performance Using SiO2 Nanoparticle-Coated Non-Spherical Ti Powder. Journal of Powder Materials. 2026;33(1):22-36. doi:10.4150/jpm.2026.00024
BibTeX
@article{Kang2026,
author = {Kang, Taehu and Gim, Ukju and Kim, Sehun and Lee, Jongik and Jeong, Sanghee and Han, Jimin and Lee, Bin},
title = {The Optimization of L-PBF Process for Economical & High Performance Using SiO2 Nanoparticle-Coated Non-Spherical Ti Powder},
journal = {Journal of Powder Materials},
year = {2026},
volume = {33},
number = {1},
pages = {22--36},
doi = {10.4150/jpm.2026.00024}
}
EUVIMED