EUVIMEDEUVIMED entdecken
Crossref

SiO 2 nanoparticle-coated Ti-6Al-4V spherical powder for powder bed fusion additive manufacturing process

Jongik Lee, Taehoo Kang, Ukju Gim, Sehun Kim, Sanghee Jung, Jimin Han, Bin Lee

Powder Metallurgy · 2025-08 · 68 (4) · 333-341

DOI: 10.1177/00325899251345247 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powder Metallurgy, online erschienen am 28.05.2025. Verfasst von Jongik Lee und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Korea Basic Science Institute, National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated a nanoparticle coating method to simultaneously improve the flow characteristics of spherical powder used in powder bed fusion (PBF) additive manufacturing (AM) and the mechanical properties of the resulting additively manufactured specimens. By employing a simple surface dry-coating of nano-sized hydrophobic SiO 2 powder, the flowability of Ti-6Al-4V powder was enhanced. Additionally, the mechanical properties including strength and hardness of the Ti-6Al-4V alloy produced via laser powder bed fusion (L-PBF) were improved by incorporating hydrophobic SiO 2 . The spherical Ti-6Al-4V powder was mixed with 0.1 wt.% SiO 2 using a 3D tubular mixer, and subsequent microstructural analyses confirmed the uniform dispersion of oxide particles. Various cubic specimens were then fabricated using the PBF process to optimize AM parameters. The relative density of the additively manufactured samples revealed that the highest density sample achieved approximately 99%. Tensile tests demonstrated that specimens fabricated from the SiO 2 -coated Ti-6Al-4V powder exhibited a maximum tensile strength of 1188 MPa and an elongation of 11.4%, representing an 11.0% improvement in tensile strength compared to samples without SiO 2 addition. The enhanced mechanical properties and subsequent microstructural analysis suggest that the increase in strength is attributable to oxide dispersion strengthening induced by SiO 2 .

Förderung

  • Korea Basic Science Institute
  • National Research Foundation of Korea

Zitieren

APA

Lee, J., Kang, T., Gim, U., Kim, S., Jung, S., Han, J., & Lee, B. (2025). SiO 2 nanoparticle-coated Ti-6Al-4V spherical powder for powder bed fusion additive manufacturing process. Powder Metallurgy, 68(4), 333-341. https://doi.org/10.1177/00325899251345247

Vancouver

Lee J, Kang T, Gim U, Kim S, Jung S, Han J, et al. SiO 2 nanoparticle-coated Ti-6Al-4V spherical powder for powder bed fusion additive manufacturing process. Powder Metallurgy. 2025;68(4):333-341. doi:10.1177/00325899251345247

BibTeX
@article{Lee2025,
  author = {Lee, Jongik and Kang, Taehoo and Gim, Ukju and Kim, Sehun and Jung, Sanghee and Han, Jimin and Lee, Bin},
  title = {SiO 2 nanoparticle-coated Ti-6Al-4V spherical powder for powder bed fusion additive manufacturing process},
  journal = {Powder Metallurgy},
  year = {2025},
  volume = {68},
  number = {4},
  pages = {333--341},
  doi = {10.1177/00325899251345247}
}
Kostenlos starten →