Comparative Evaluation of Mechanical Properties of Clear Aligner Biosheet Materials -An In Vitro Study
Journal of Pharmacy and Bioallied Sciences · 2025-06 · 17 (Suppl 2) · S1616-S1618
DOI: 10.4103/jpbs.jpbs_189_25 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Pharmacy and Bioallied Sciences, online erschienen am 18.06.2025. Verfasst von Pallavi Kusum und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dentistry (Orthodontics and Dentofacial Orthopaedics), Nims Dental College and Hospital, Nims University, Jaipur, Rajasthan, India. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 8 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
A BSTRACT Background: Thermoplastic polymers are extensively used in the fabrication of clear aligners due to their biocompatibility, flexibility, and mechanical properties. Evaluating the mechanical performance of these materials under clinical conditions is crucial for optimizing their application. Materials and Methods: Two types of thermoplastic polymers, **Duran** and **Zendura**, were selected for analysis. Specimens with uniform dimensions (10 mm × 50 mm × 1 mm) were prepared from sheets of each material. Tensile strength, elastic modulus, and flexural strength were measured using a universal testing machine (UTM) under controlled conditions. Cyclic loading tests were conducted to simulate intraoral forces over 1000 cycles at 37°C in an artificial saliva solution. Data were statistically analyzed using one-way ANOVA with a significance level of P < 0.05.
Results
Zendura exhibited higher tensile strength (average: 62 ± 3 MPa) and elastic modulus (average: 2400 ± 100 MPa) compared to Duran (tensile strength: 55 ± 2 MPa; elastic modulus: 2100 ± 90 MPa). Similarly, Zendura showed superior flexural strength. Cyclic loading tests revealed that Zendura retained 96% of its original mechanical properties after 1000 cycles, while Duran retained 93%.
Conclusion
Zendura outperformed Duran in tensile strength, elastic modulus, and flexural strength, making it a highly suitable material for aligner fabrication. However, Duran demonstrated satisfactory flexibility and durability, which may provide specific clinical advantages.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Dentistry (Orthodontics and Dentofacial Orthopaedics), Nims Dental College and Hospital, Nims University, Jaipur, Rajasthan, India.
- Department of Orthodontics and Dentofacial Orthopaedics, Nims Dental College and Hospital, Nims University, Jaipur, Rajasthan, India.
- Department of Orthodontics and Dentofacial Orthopaedics, Buddha Institute of Dental sciences and Hospital, Patna, Bihar, India.
Zitieren
APA
Kusum, P., Sharma, S., & Jha, S. (2025). Comparative Evaluation of Mechanical Properties of Clear Aligner Biosheet Materials -An In Vitro Study. Journal of Pharmacy and Bioallied Sciences, 17(Suppl 2), S1616-S1618. https://doi.org/10.4103/jpbs.jpbs_189_25
Vancouver
Kusum P, Sharma S, Jha S. Comparative Evaluation of Mechanical Properties of Clear Aligner Biosheet Materials -An In Vitro Study. Journal of Pharmacy and Bioallied Sciences. 2025;17(Suppl 2):S1616-S1618. doi:10.4103/jpbs.jpbs_189_25
BibTeX
@article{Kusum2025,
author = {Kusum, Pallavi and Sharma, Shantanu and Jha, Sovendu},
title = {Comparative Evaluation of Mechanical Properties of Clear Aligner Biosheet Materials -An In Vitro Study},
journal = {Journal of Pharmacy and Bioallied Sciences},
year = {2025},
volume = {17},
number = {Suppl 2},
pages = {S1616--S1618},
doi = {10.4103/jpbs.jpbs_189_25}
}
EUVIMED