EUVIMEDEUVIMED entdecken
Open Access

Bond strength of polymer clay with room temperature vulcanizing maxillofacial silicone – An in vitro study

Jayant N Palaskar, Amit Dhansukhlal Hindocha, Tejas V Nalawade, Shrishti R Khurana, Anupama Patankar, Naisargi Shah

The Journal of Indian Prosthodontic Society · 2024

DOI: 10.4103/jips.jips_543_23 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Indian Prosthodontic Society, 2024. Verfasst von Jayant N Palaskar und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Sinhgad Dental College and Hospital, Pune, Maharashtra, India. Hauptthemen laut MEDLINE: Polymethyl Methacrylate, Maxillofacial Prosthesis, Aluminum Silicates, Silicones. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

To assess and analyze the bond strength of polymeric organic clay and heat polymerized PMMA with RTV maxillofacial silicone with and without an adhesive primer. Settings and Design: The use of polymeric clay as a substructure for implant retained maxillofacial silicone prosthesis is suggested. However, the bond strength of polymeric clay with room temperature vulcanizing (RTV) maxillofacial silicone and heat polymerized polymethyl methacrylate(PMMA) with RTV maxillofacial silicone has yet to be studied. Materials and Methods: Fifty two samples were prepared in total. Group 1 ( n = 13) silicone and PMMA without primer. Group 2 ( n = 13) silicone and PMMA with primer. Group 3 ( n = 13) silicone and polymer clay without primer. Group 4 (n = 13) silicone and polymer clay with primer. The samples were of dimensions of 75 mm × 10 mm × 3 mm. For groups 1 and 2, samples were fabricated with PMMA over which RTV silicone was manipulated, packed and vulcanized for 24 h. For Groups 3 and 4, polymer clay was molded to the required dimensions and hardened. RTV maxillofacial silicone was manipulated and packed over it and vulcanized. For Group 2 and 4 samples, primer was applied to the uncovered part of PMMA and polymeric clay respectively. The samples were subjected to a 180° and 90° ( t peel test) peel strength test, respectively. Statistical Analysis Used: One way analysis of variance was used to analyze bond strength, which was then followed by a post hoc Tukey’s test.

Results

The mean bond strength of silicone and PMMA without primer was 0.35 ± 0.07 mN/m, while silicone and PMMA with primer had a mean bond strength of 0.41 ± 0.04 mN/m. The mean bond strength of silicone and polymer clay without primer and silicone and polymer clay with primer was found to be 0.45 ± 0.13 mN/m and 0.30 ± 0.05 mN/m, respectively. An 80% research power and a 95% confidence interval were used in the statistical analysis. A significance threshold of P < 0.05 was applied.

Conclusion

The silicone to heat polymerized PMMA primer bond strength is the same as the silicone to polymer clay primer bond strength. Bond strength of polymer clay and maxillofacial silicone without primer is better than with primer. Therefore, without primer application, polymer clay substitutes PMMA as an interface between maxillofacial silicone material and attachments/keepers.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polymethyl MethacrylateMaxillofacial ProsthesisAluminum SilicatesSiliconesClayMaterials TestingTemperaturePolymerizationHumans

Substanzen

Polymethyl MethacrylateClayAluminum SilicatesSilicones

Autor:innen und Institutionen

  • Department of Prosthodontics, Sinhgad Dental College and Hospital, Pune, Maharashtra, India.
  • Department of Prosthodontics, Terna Dental College, Navi Mumbai, Maharashtra, India.

Zitieren

APA

Palaskar, J. N., Hindocha, A. D., Nalawade, T. V., Khurana, S. R., Patankar, A., & Shah, N. (2024). Bond strength of polymer clay with room temperature vulcanizing maxillofacial silicone – An in vitro study. The Journal of Indian Prosthodontic Society. https://doi.org/10.4103/jips.jips_543_23

Vancouver

Palaskar JN, Hindocha AD, Nalawade TV, Khurana SR, Patankar A, Shah N. Bond strength of polymer clay with room temperature vulcanizing maxillofacial silicone – An in vitro study. The Journal of Indian Prosthodontic Society. 2024. doi:10.4103/jips.jips_543_23

BibTeX
@article{Palaskar2024,
  author = {Palaskar, Jayant N and Hindocha, Amit Dhansukhlal and Nalawade, Tejas V and Khurana, Shrishti R and Patankar, Anupama and Shah, Naisargi},
  title = {Bond strength of polymer clay with room temperature vulcanizing maxillofacial silicone – An in vitro study},
  journal = {The Journal of Indian Prosthodontic Society},
  year = {2024},
  doi = {10.4103/jips.jips_543_23}
}
Kostenlos starten →