EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Effect of cathodic arc plasma spraying on shear bond strength between polyether ether ketone and maxillofacial silicone after accelerated aging - An in vitro study

Ganesh Ramkumar Rajapandi, Ahila Singaravel Chidambaranathan, Muthukumar Balasubramanium

The Journal of Indian Prosthodontic Society · 2025

DOI: 10.4103/jips.jips_203_25 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Indian Prosthodontic Society, 2025. Verfasst von Ganesh Ramkumar Rajapandi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, SRM Dental College, Ramapuram, Bharathi Salai, Chennai, Tamil Nadu, India. Hauptthemen laut MEDLINE: Ketones, Polyethylene Glycols, Shear Strength, Silicones. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

To evaluate and compare the shear bond strength between polyether ether ketone (PEEK) and maxillofacial silicone after cathodic arc plasma spraying and accelerated aging. Settings and Design: An in vitro study. Materials and Methods: According to ISO 10477:2020, 72 PEEK specimens were fabricated using computer-aided design/computer-aided manufacturing with 10-mm diameter and 3-mm thickness, and the silicone specimens were made with 5-mm diameter with 2.5-mm height. The specimens were categorized into Group 1 - No surface treatment, Group 2 - Cathodic arc plasma spraying, and Group 3 - Primer application. The silicone specimens were bonded to PEEK and subjected to accelerated aging for 252 and 504 h. The shear bond strength was performed using a universal testing machine at 1 mm/min crosshead speed. Statistical Analysis Used: One-way ANOVA, Tukey HSD test, and Student’s t -test, where P < 0.5 was set as significant.

Results

PEEK specimens subjected to primer application exhibited highest shear bond strength of 19.22 ± 0.35 Mpa, 18.55 ± 0.60 Mpa, 18.14 ± 0.65 Mpa, followed by cathodic arc plasma spraying 14.71 ± 0.28 Mpa, 13.54 ± 0.42 Mpa, 12.46 ± 0.48 Mpa after 24 h of fabrication, 252 h, and 504 h of aging and the least shear bond strength exhibited by control 4.98 ± 0.32, Mpa, 4.52 ± 0.33 Mpa, 4.2 ± 0.39 Mpa, respectively. The significance value P = 0.0001, which was

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

KetonesPolyethylene GlycolsShear StrengthSiliconesMaxillofacial ProsthesisPlasma GasesBenzophenonesMaterials TestingPolymersIn Vitro TechniquesComputer-Aided DesignSurface PropertiesHumans

Stichwörter der Autor:innen

Accelerated agingmaxillofacial prosthesesmaxillofacial siliconepolyether ether ketone

Substanzen

KetonesBenzophenonespolyetheretherketonePolyethylene GlycolsSiliconesPolymersPlasma Gases

Autor:innen und Institutionen

  • Department of Prosthodontics, SRM Dental College, Ramapuram, Bharathi Salai, Chennai, Tamil Nadu, India.

Zitieren

APA

Rajapandi, G. R., Chidambaranathan, A. S., & Balasubramanium, M. (2025). Effect of cathodic arc plasma spraying on shear bond strength between polyether ether ketone and maxillofacial silicone after accelerated aging - An in vitro study. The Journal of Indian Prosthodontic Society. https://doi.org/10.4103/jips.jips_203_25

Vancouver

Rajapandi GR, Chidambaranathan AS, Balasubramanium M. Effect of cathodic arc plasma spraying on shear bond strength between polyether ether ketone and maxillofacial silicone after accelerated aging - An in vitro study. The Journal of Indian Prosthodontic Society. 2025. doi:10.4103/jips.jips_203_25

BibTeX
@article{Rajapandi2025,
  author = {Rajapandi, Ganesh Ramkumar and Chidambaranathan, Ahila Singaravel and Balasubramanium, Muthukumar},
  title = {Effect of cathodic arc plasma spraying on shear bond strength between polyether ether ketone and maxillofacial silicone after accelerated aging - An in vitro study},
  journal = {The Journal of Indian Prosthodontic Society},
  year = {2025},
  doi = {10.4103/jips.jips_203_25}
}
Kostenlos starten →