Effects of various functional monomers’ reaction on the surface characteristics and bonding performance of polyetheretherketone
Journal of Prosthodontic Research · 2023
DOI: 10.2186/jpr.jpr_d_23_00063 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2023. Verfasst von Huei-Yu Huang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dentistry, Taipei Medical University Shuang Ho Hospital, New Taipei City, Taiwan. Hauptthemen laut MEDLINE: Dental Bonding, Methacrylates, Polyurethanes. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 42 Literaturangaben.
Abstract (Originalsprache)
PURPOSE: Polyetheretherketone (PEEK) is a new polymeric material that has received significant attention in dentistry because of its mechanical properties, biocompatibility, and aesthetics. However, the bonding performance of PEEK to other materials is not preferable. This study aimed to analyze the variations in the surface characteristics of PEEK under the chemical action of primers containing different functional monomers or polymers and to evaluate the bonding performance of PEEK and dental cement. METHODS: Disk-shaped PEEK samples were prepared by dental milling, blasting with alumina oxide, and covering with primers containing functional monomers or polymers. The surface characteristics of the samples were analyzed by microscopy and spectroscopy. The shear bond strength (SBS) between PEEK and dental cement, with and without thermocycling, was tested using a universal testing machine. Finally, the data were statistically analyzed and compared. RESULTS: Functional monomers or polymers were successfully bonded to the surface of PEEK. This treatment significantly improved its hydrophilicity and surface free energy (P < 0.05). The primer containing pentaerythritol triacrylate had the highest SBS without thermocycling (13.89 MPa). Meanwhile, the primers containing urethane dimethacrylate (UDMA) and methyl methacrylate (MMA) (abbreviated as the HC group) showed the highest SBS and lowest reduction (25.51%) after thermocycling. Notably, all the testing groups achieved the ISO10477 standard of 5 MPa. After thermocycling, adhesive failure accounted for the largest proportion of failures in all the groups except the HC group. CONCLUSIONS: The chemical priming treatment can significantly improve the SBS of PEEK and dental cement. Moreover, a primer containing both UDMA and MMA can provide improved bonding for PEEK materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Dentistry, Taipei Medical University Shuang Ho Hospital, New Taipei City, Taiwan.
- School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei, Taiwan.
- School of Dental Technology, College of Oral Medicine, Taipei Medical University, Taipei, Taiwan.
- Department of Oral Biology & Engineering, Graduate School of Biomedical and Health Sciences, Hiroshima University, Hiroshima City, Hiroshima, Japan.
Zitieren
APA
Huang, H. Y., Feng, S. W., Chiang, K. Y., Li, Y. C., Peng, T. Y., & Nikawa, H. (2023). Effects of various functional monomers’ reaction on the surface characteristics and bonding performance of polyetheretherketone. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_23_00063
Vancouver
Huang HY, Feng SW, Chiang KY, Li YC, Peng TY, Nikawa H. Effects of various functional monomers’ reaction on the surface characteristics and bonding performance of polyetheretherketone. Journal of Prosthodontic Research. 2023. doi:10.2186/jpr.jpr_d_23_00063
BibTeX
@article{Huang2023,
author = {Huang, Huei-Yu and Feng, Sheng-Wei and Chiang, Kuan-Yu and Li, Yun-Chen and Peng, Tzu-Yu and Nikawa, Hiroki},
title = {Effects of various functional monomers’ reaction on the surface characteristics and bonding performance of polyetheretherketone},
journal = {Journal of Prosthodontic Research},
year = {2023},
doi = {10.2186/jpr.jpr_d_23_00063}
}
EUVIMED